WELCOME TO HAMILTON HOBBIES
Home Bookmark and Share View Cart

Traxxas Parts

TRA1548.jpg
Traxxas Set Screw 3x4mm (8)/4x4mm (4)
$2.00
TRA1548

These are the Traxxas 3x4mm and 4x4mm Set Screws.

FEATURES: Constructed of steel Also known as grub screws

Quantity   
TRA1552.jpg
Traxxas Hex Motor Screws (4)
$3.00
TRA1552

These are replacement motor screws and washers for any 05 size motor.

Features: 6 3x8mm socket head screws 6 3mm washers 1 Hex allen wrench

Quantity   
TRA1633.jpg
Traxxas E-Clips/C-Clips/R Pins (40)
$2.00
TRA1633

This is a assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks.

INCLUDES: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips, 4 of the shock C-clips and 3 body clips.

Quantity   
TRA1651.jpg
Traxxas Half Shafts U-Joints Blue Eagle LS (2)
$6.00
TRA1651

This is a pair of half shafts (swing shafts or dog bones) which will work with most Traxxas electric vehicles, the Nitro Street and the Nitro Buggy. But these will not work with the Nitro Hawk they are too short!

Features: White plastic half shafts with universal joint ends Metal universal joints

Includes: (2) inside shafts (2) outside shafts (4) universal joints (metal balls with 4 pins sticking out in a cross pattern)

Quantity   
TRA1654.jpg
Traxxas Wheel Hubs (2)
$2.00
TRA1654

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet, Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the rear wheels to the axles.

INCLUDES: 2- plastic hex collars (wheel adapters) 4- stub axle pins

Quantity   
TRA1654X.jpg
Traxxas Wheel Hubs Aluminum (2)
$9.00
TRA1654X

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES: Blue aluminum construction

INCLUDES: Two hex hubs Four axle pins

Quantity   
TRA1664.jpg
Traxxas Shock Shafts Long LSII
$3.00
TRA1664

This is the replacement front shock shafts for the Traxxas LSII.

Includes: 2- front shock shafts.

Quantity   
TRA1747.jpg
Traxxas Nylon Locknuts (10)
$2.00
TRA1747

These are 4mm Locking Nuts from Traxxas.

FEATURES: Stainless steel construction. Nylon insert.

INCLUDES: Six Lock Nuts

Quantity   
TRA1765.jpg
Traxxas Body Washers (8)
$2.00
TRA1765

This is the Traxxas replacement Body Washers.

FEATURES: Nylon construction; Helps prevent the body mount hole from cracking prematurely;White in color

INCLUDES: Eight large body mount washers

Quantity   
TRA1815.jpg
Traxxas Body Washers (8)
$2.00
TRA1815

This is the Traxxas replacement Body Washers.

FEATURES: Nylon construction; Helps prevent the body mount hole from cracking prematurely; White in color

SPECS: Outer Diameter: 0.87" (22mm) Inner Diameter: 0.26" (6.7mm)
INCLUDES: Eight large body mount washers
Quantity   
TRA1834.jpg
Traxxas Body Clips (12)
$2.00
TRA1834

These are Replacement Traxxas Body Clips. They can be used on Traxxas or most other brands of cars.

FEATURES: Metal clips are silver in color.

INCLUDES: Twelve body clips

SPECS: Length: aprrox. 7/8"

Quantity   
TRA1844.jpg
Traxxas Servo Saver Large
$4.00
TRA1844

This is a large servo saver that can be used in Traxxas cars or any car that requires a large style servo saver.

FEATURES: Tough white plastic construction.

INCLUDES: 1 large servo saver and 3 adaptors that allow you to mount the saver on most popular servos including: Futaba, Hobbico, Tower, Airtronics, and Traxxas. Also included is a mounting screw.

SPECIFICATIONS: Length: 1-3/8" Diameter: 1" The servo saver has 6 holes for mounting the steering linkages.

Quantity   
TRA1942.jpg
Traxxas Rod End Ball Screw Connector B/E
$7.00
TRA1942

This set of rod ends, balls, and screws is used on all but four of Traxxas' kits. It WILL NOT WORK ON: the Sledgehammer, original Hawk, Cat, or Bullet.

Includes: 4 short rod ends (17mm)

16 long rod ends (19mm)

2 ball screws

18 hollow ball connectors

Quantity   
TRA1948.jpg
Traxxas Aluminum Screws 4x12mm (12)
$2.00
TRA1948

These are 4x12mm Flat Head Screws from Traxxas.

FEATURES: Gray anodized aluminum construction. Phillips drive insert. 90 degree. Countersunk, to sit flush.
INCLUDES: (12) screws

Quantity   
TRA1951.jpg
Traxxas Long Truck Half Shafts H&BE (2)
$6.00
TRA1951

This is a set of telescoping drive shafts for the Blue Eagle LS II.

Includes: 2 white nylon telescoping shaft (each shaft is made of two pieces) 4 aluminum U-joints

Quantity   
TRA1952.jpg
Traxxas Stub Axle Housing (2)
$3.00
TRA1952

These are the axle housings (or hub carriers) used on the: Rad 2, Hawk 2, Eagle, Blue Eagle LS II and Nitro Rustler. The housings are molded of black nylon.

Includes: 2 axle housings

Quantity   
TRA1985.jpg
Traxxas Fiber Washers 5x8mm (20)
$2.00
TRA1985

These are Replacement Washers from Traxxas.

FEATURES: Black plastic construction. Used on the axles and in the transmission. INCLUDES: (20) Washers

Quantity   
TRA1994.jpg
Traxxas Slipper Tension Spring
$2.50
TRA1994

This is the replacement slipper tension spring set for the Traxxas kits that have slipper clutches (Rad 2, Hawk 2, TRX-1, Blue Eagles).

PACKAGE INCLUDES:

Slipper tension spring (1)

Spur gear bushing (1) -- white

4mm Locknut with nylon insert (1)

TRA2010.jpg
Traxxas Servo Gear Set 2018
$4.00
TRA2010

This is the Replacment Gear Set for the Traxxas #2018 Servos.
FEATURES: Nylon and Brass Construction INCLUDES: Four Gear Washers 1st, 2nd, 3rd and 4th Nylon Gears 5th Brass Gear
Quantity   
TRA2041.jpg
Traxxas Servo Case 2018 Servo
$3.00
TRA2041

This is the Servo Case Set for the Traxxas #2018 Servo, (TRAM2018). This set serves as the outer cover for the servo.

INCLUDES: One Servo Case Set for the Traxxas #2018 Servo with top, center and bottom sections. Screws not included.

REQUIRES: Installing all components into case set and reusing screws from original case.

Quantity   
TRA2052.jpg
Traxxas Servo Case 2055 Servo
$3.00
TRA2052

This is the Servo Case Set for the Traxxas #2055 Servo, (TRAM2055). This set serves as the outer cover for the servo.

FEATURES: Replaces top, center and bottom sections of damaged servo cases. Constructed of black plastic.

INCLUDES: One Servo Case Set for the Traxxas #2055 Servo with top, center and bottom sections. Screws not included.

REQUIRES: Installing all components into case set and reusing screws from original case.

COMMENTS: This set does not come with original decal.

Quantity   
TRA2053.jpg
Traxxas Servo Gears 2055 Servo
$4.00
TRA2053

This is a replacement Gear set for the Traxxas 2055 Servo.

FEATURES: Grey plastic and brass construction.

INCLUDES: One 25 and 41 tooth output gear.

One 35 and 16 tooth gear (gear #7).

One 10 and 62 tooth gear (gear #9).

One 10 and 50 tooth gear (gear #11).

One 10 tooth pinion gear.

One grey plastic bushing race.

One grey plastic output gear race.

Two brass output gear bushings.

One exploded view.

REQUIRES: Assembly in servo.

Remainder of servo components.

Quantity   
TRA2063.jpg
Traxxas Servo Case/Gaskets E-Maxx
$5.50
TRA2063

This is the Servo Case/Gasket Set for the Traxxas E-Maxx.

FEATURES: Durable blue plastic construction

INCLUDES: 3 plastic cases and rubber sealing items, instruction sheet

REQUIRES: Application into servo case per instructions

Quantity   
TRA2072.jpg
Traxxas Gear Set 2070 & 2075 Servos
$4.00
TRA2072

This is the replacement Gear Set for the 2070 & 2075 Servo.

FEATURES: Complete gear set for the Traxxas 2070 (TRAM2070) or 2075 servo

INCLUDES: Four servo gears and bearings and instuction sheet

REQUIRES: Installation on the 2070 or 2075 Traxxas servo

Quantity   
TRA2082.jpg
Traxxas Gear Set for VXL Micro Waterproof Servo
$4.00
TRA2082

This is the Servo Gear Set for use on the Traxxas VXL Micro Waterproof Servo (TRAM2080).

FEATURES: Nylon construction

Grey in color

INCLUDES: One Output Gear

One Top Reduction Gear

One Center Reduction Gear

One Bottom Reduction Gear

Instruction sheet

REQUIRES: Installation on the servo

Quantity   
TRA2217.jpg
Traxxas Receiver 2.4GHz Micro 4-Channel
$45.00
TRA2217

This is the 2.4GHz Micro 4 Channel Receiver from Traxxas.

1st generation, not compatible with the Traxxas TQi 4-Channel Radio.

FEATURES: 2.4GHz

For use with the Traxxas TQ 2.4GHz 4-ch Spread Spectrum radio

INCLUDES: One 2.4GHz 4 Channel Micro Receiver

REQUIRES: Installation in vehicle and connecting battery and servos

SPECS: Length: 38mm (1.5")

Width: 26mm (1")

Height: 16mm (0.63")

Quantity   
TRA2223.jpg
Traxxas Battery Door TQ
$4.00
TRA2223

This is the Battery Door for the Traxxas TQ transmitter.

FEATURES: Nylon door with latch

INCLUDES: One battery door

REQUIRES: TQ transmitter

SPECS: Length: 4-5/8" (117mm)

Width: 2-3/4" (70mm)

COMMENTS: The TQ is the standard pistol transmitter for Traxxas RTR kits.

Quantity   
TRA2334.jpg
Traxxas Turnbuckles 50mm LS2 (2)
$2.00
TRA2334

This is the replacement 50mm turnbuckles for the Traxxas Blue Eagle LS-II. These are the turnbuckles (or "tie rods") that go between the steering bellcrank and the knuckle arms and are made of steel.

PACKAGE INCLUDES: Two 50mm turnbuckles.

COMMENTS: Plastic rod ends are NOT included...use TRAC4742. The turnbuckles have a molded in nut to make adjustments simple. Uses a 5mm wrench for adjusting

Quantity   
TRA2336X.jpg
Traxxas Aluminum Toe Links Stampede
$12.00
TRA2336X

These are optional Assembled Aluminum Toe Links w/Rod Ends and Hollow Balls. Fits the Traxxas Stampede.

FEATURES: Aluminum Construction
Anodized Red

INCLUDES: (2) Assembled Turnbuckles

REQUIRES: Installation onto Stampede 5mm Wrench, TRA5477

SPECS: Length: 2.4" (61mm)

Quantity   
TRA2339.jpg
Traxxas Turnbuckles 105mm T-Maxx (2)
$6.00
TRA2339

This is the Replacement Set of Turnbuckles for the Traxxas T-Maxx 4WD Radio Control Monster Truck.

These turnbuckles link the rear bulkheads to the axle carriers and provide toe-in adjustment for the rear wheels.

FEATURES: Replaces damaged or worn turnbuckles

Constructed of steel

Flattened area in center of turnbuckle allows easy adjustment with small wrench or pliers

INCLUDES: Two 105mm turnbuckles for the Traxxas T-Maxx Monster Truck

Four plastic ball ends

REQUIRES: Attaching to rear bulkheads (4929) and axle carriers (4932) and adjusting toe-in

Quantity   
TRA2362.jpg
Traxxas Shock Rebuild Kit
$2.50
TRA2362

This is a shock rebuild kit for 2 Traxxas black plastic shocks.

Includes:

4 E-clips

2 C-clips

2 O-rings

8 Washers

2 Diaphrams

Quantity   
TRA2550.jpg
Traxxas Planet Gear Shafts (4)
$6.00
TRA2382

These are the replacement planetary gear and shafts for the Rad 2 and Hawk 2.

FEATURES: All these gears and shafts are made of metal(probably with a low amount of steel).

INCLUDES: 4- planetary gears

4- planteary gear shafts

2- sun gears

1- sun gear alignment shaft

Quantity   
TRA2416.jpg
Traxxas Pinion Gear 48P 16T w/Set Screw
$3.50
TRA2416

This is the 16 Tooth 48 Pitch Pinion Gear from Traxxas.

FEATURES: Steel construction

INCLUDES: 16 Tooth 48 Pitch Pinion Gear with set screw

REQUIRES: Installing on motor shaft

SPECS: Number of Teeth: 16T

Pitch: 48

Inner Diameter: 0.12" (3mm)

Quantity   
TRA2437.jpg
Traxxas Front Axles Bandit
$3.00
TRA2437

This is a pair of Front Axles for the Traxxas Bandit Buggy Kit and the Ready To Run version.

FEATURES: Constructed of steel.

INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run Version with two 0.14"(3.5mm) x 0.26"(7mm) plastic hex nuts.

SPECS: Length: 0.94" (24mm)

Length of threaded area: 0.14" (3.5mm)

Thread size: 0.16" (4mm)

REQUIRES: Placing each axle into the Steering Blocks (TRAC9036), and installing Stub Axle Pins (TRAC6754).

Quantity   
TRA2447.jpg
Traxxas Nylon Wheel Nut 4mm Bandit (4)
$1.50
TRA2447

These are 4mm Nylon Wheel Nuts for the Traxxas Bandit.

FEATURES: White nylon construction

INCLUDES: Four wheel nuts

Quantity   
tra2514.jpg
Traxxas Sponsor Decal Sheet
$3.00
TRA2514

This is a Sponsor Decal Set for R/C Cars from Traxxas.

FEATURES:
These decals are designed to be used on any scale lexan R/C car and truck bodies. Pressure sensitive, peel and stick vinyl decals. These are the contingency/sponsorship decals that are used on race cars.

Logos include:
Traxxas, Lunati Cams, Hedman Hedders, Simpson, MSD, Mr. Gasket, NOS, Accel, Hurst, and more.

Multi-purpose decal set is appropriate for any type of car.

SPECS:
Length: 9-1/8" (23.2cm)
Width: 5-1/8" (13.0cm)

Quantity   
trac2530a.jpg
Traxxas Front Bulkhead
$6.00
TRA2530A

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece.

FEATURES: Black nylon construction

INCLUDES: One front bulkhead

REQUIRES: Nothing. This is a direct replacement part.

SPECS: Length: 73.6mm (2.90")

Width: 41mm (1.62")

Height: 29mm (1.14")

COMMENTS: This part is used on the following vehicles:

Rustler, Bandit, Stampede, Nitro R

Quantity   
TRA2531X.jpg
Traxxas Suspension Arms Front (2)
$11.00
TRA2531X

These are the Replacement Front Suspension Arms for many Traxxas kits. These are located on the front bulkhead and are held on by suspension pins.

FEATURES: Nylon construction

Black in color

INCLUDES: Two black nylon suspension arms

REQUIRES: Assembly onto kit.

SPECS: Length: 3"

Width: 1.2"

COMMENTS: This will work on the Bandit, Nitro Stampede, Nitro Rustler, SRT, and the Nitro Sport.

Quantity   
TRA2532.jpg
Traxxas Fiberglass Tie Bar
$4.00
TRA2532

This is a Firberglass Tie Bar by Traxxas for the SRT

FEATURES: Fiberglass Construction

INCLUDES: One Tie Bar

REQUIRES: Suspension Pins (TRAC4940)

SPECS: Length: 98.4 mm (3.875")

Width: 7.9 mm (0.3125")

Thickness: 2.0 mm (0.082")

Quantity   
TRA2535.jpg
Traxxas Countersunk Hex Screw 4x10mm Jato (6)
$2.50
TRA2535

These are the Countersunk 4mm x 10mm Screws for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Metal construction

Black in color

INCLUDES: Six 4mm x 10mm Countersunk Flathead Hex Screws

REQUIRES: Assembly onto Vehicle

Quantity   
TRA2536.jpg
Traxxas Steering Block/Spindles
$7.50
TRA2536

These are Replacement Steering Blocks and Wheel Spindles for the Traxxas Nitro Rustler, Nitro Stampede, and Nitro Sport.

FEATURES: Black Plastic Steering Blocks

Aluminum Wheel Spindles

INCLUDES: Two Steering Blocks

Two Wheel Spindles

REQUIRES: Traxxas Nitro Stampede, Nitro Sport, or Nitro Rustler.

Quantity   
TRA2537.jpg
Traxxas Threaded Rods 20/25/44mm (1)
$2.50
TRA2537

These are 3mm Threaded Rods by Traxxas.

FEATURES: Steel Shafts

INCLUDES: One 20mm Shaft

One 25mm Shaft

One 44mm shaft

REQUIRES: Installation on vehicle

Quantity   
TRA2545.jpg
Traxxas Bellcrank Bushings (4)
$3.00
TRA2545

These are the Stock Replacement Bellcrank Bushings for the Nitro Rustler. These are located in the steering bellcrank arms.

FEATURES: White nylon construction

INCLUDES: Four 5x8x2.5mm bushings

Four 5x8x1.5mm spacers

REQUIRES: Installation into Nitro Rustler.

OMMENTS: For bearing upgrades, use (2) DTXC1523.

Quantity   
TRA2548.jpg
Traxxas Countersunk Screws 4x12mm (6)
$1.50
TRA2548

These are Countersunk Machine Screws from Traxxas.

FEATURES: Steel construction

Phillips drive insert

100 degree

INCLUDES: (6) Screws

SPECS: Size: 4mm X 12mm

Quantity   
TRA2550.jpg
Traxxas Countersunk Hex Screw 3x8mm (6)
$2.50
TRA2550

These are 3x8mm Countersunk Hex Head Screws by Traxxas. Can be used anywhere this type of screw is needed.

FEATURES: Metal Construction

Black in Color

Countersunk

INCLUDES: (6) Screws

SPECS: Length: 8mm

Diameter: 3mm

Quantity   
TRA2551.jpg
Traxxas Screws Countersunk Machine 3x10mm Revo (6)
$2.50
TRA2551

This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws.

FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm countersunk screw is required.

INCLUDES: Six 3x10mm Traxxas Countersunk Hex Screws

REQUIRES: 2mm hex head wrench, GPMR8011

Quantity   
TRA2552.jpg
Traxxas Screws Countersunk Machine 3x12mm Revo (6)
$2.50
TRA2552

This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws.

FEATURES: Steel construction, Black in color, Used on the Traxxas Revo monster truck, can also be used in any application where a 3x12mm countersunk screw is required.

INCLUDES: Six 3x12mm Traxxas Countersunk Hex Screws

REQUIRES: 2mm hex head wrench, GPMR8011

SPECS: Length: 12mm

Diameter: 3mm

Quantity   
TRA2553.jpg
Traxxas Screws Countersunk Machine 3x15mm Revo (6)
$2.50
TRA2553

This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws.

FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x15mm countersunk screw is required

INCLUDES: Six 3x15mm Traxxas Countersunk Hex Screws

REQUIRES: 2mm hex head wrench, GPMR8011

SPECS: Length: 15mm Diameter: 3mm

Quantity   
TRA2555.jpg
Traxxas Suspension Arms Rear (2)
$10.00
TRA2555

These are the Rear Suspension Arms for the Traxxas Electric SRT, Nitro Rustler, Nitro Sport and Nitro Stampede Kits.

FEATURES: Durable Black plastic construction

INCLUDES: One left suspension arm One right suspension arm

REQUIRES: TRAC5739 screw pins for installing

SPECS: Length: 3-5/8"

Quantity   
TRA2556.jpg
Traxxas Header Screws (6)
$2.50
TRA2556

These are 3x23mm Header Screws from Traxxas.

FEATURES: Black steel construction Hexagon socket drive insert High round cap head screws

INCLUDES: (6) Screws

SPECS: Length: 23mm Diameter: 3mm

Quantity   
TRA2560.jpg
Traxxas Round Head Screw 3x10mm (6)
$1.50
TRA2560

These are the 3x10mm Round Head Machine Screws by Traxxas.

FEATURES: Machine threaded Phillips head Silver in color

INCLUDES: Six round head machine screws

SPECS: Length: 10mm Diameter: 3mm

Quantity   
TRA2563.jpg
Traxxas Round Head Screw 3x15mm (6)
$1.50
TRA2563

These are the 3x15mm Roundhead Screws from Traxxas.

FEATURES: Steel construction Silver in color

INCLUDES: Six 3x15mm Roundhead Screws

REQUIRES: Phillips screwdriver, TAMR7407

SPECS: Length: 15mm (0.59")

Width: 3mm (0.12")

Quantity   
TRA2566.jpg
Traxxas Round Head Machine Screws 3x20mm (6)
$1.50
TRA2566

These are Round Head Machine Screws from Traxxas.

FEATURES: Steel construction Round head with phillips drive insert

INCLUDES: Six screws

SPECS: 3mm thread size 20mm long

Quantity   
TRA2575.jpg
Traxxas Button Head Machine Screw 3x6mm Revo (6)
$2.50
TRA2575

This is a package of six 3x6mm Traxxas Button Head Screws.

FEATURES: Steel construction, Black in color, Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required.

INCLUDES: Six 3x6mm Traxxas Button Head Screws

REQUIRES: 2mm hex head wrench, GPMR8011
SPECS: Length: 6mm Diameter: 3mm
Quantity   
TRA2577.jpg
Traxxas Button Head Screw 3x10mm Revo (6)
$2.50
TRA2577

This is a Package of Six 3mm x 10mm Button Head Screws.

FEATURES: Metal Construction Black in Color Button Head Type Machine Thread

INCLUDES: Six 3mm x 10mm Button Head Machine Thread Screws

Quantity   
TRA2577.jpg
Traxxas Button Head Screws 3x12mm (6)
$2.50
TRA2578

These are 3x12mm Button Head Screws from Traxxas.

FEATURES: Steel Construction Black in color Hex head

INCLUDES: Six button head screws

SPECS: Length: 12mm (.47")

Diameter: 3mm (.12")

Quantity   
TRA2579.jpg
Traxxas Button Head Machine Screw 3x15mm Revo (6)
$2.50
TRA2579

This is a package of six 3x15mm Traxxas Button Head Screws.

FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x15mm button head screw is required.

INCLUDES: Six 3x15mm Traxxas Button Head Screws

REQUIRES: 2mm hex head wrench, GPMR8011

SPECS: Length: 15mm
Diameter: 3mm

Quantity   
TRA2580.jpg
Traxxas Button Head Machine Screw 3x20mm Revo (6)
$2.50
TRA2580

This is a package of six 3x20mm Traxxas Button Head Screws.

FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x20mm button head screw is required.

INCLUDES: Six 3x20mm Traxxas Button Head Screws

REQUIRES: 2mm hex head wrench, GPMR8011

SPECS: Length: 20mm
Diameter: 3mm

Quantity   
TRA2581.jpg
Traxxas Button Head Machine Screw 3x25mm Revo (6)
$2.50
TRA2581

These are 3x25mm Button Head Machine Screws w/hex drive for the REVO from Traxxas.

FEATURES: Black steel construction

INCLUDES: Six 3x25mm Button Head Machine Screws

REQUIRES: 2mm hex wrench

SPECS: Length: 25mm
Diameter: 3mm

Quantity   
TRA2582.jpg
Traxxas Button Head Machine Screw 3x30mm Revo (6)
$2.50
TRA2582

This is a 6 pack of 3X30mm Button Head Screws.

FEATURES: Steel construction Black in color Button head design

INCLUDES: (6) 3X30mm button head screws

SPECS: Length: 1-3/16" (30mm)
Diameter: 1/8" (3mm)

Quantity   
TRA2583.jpg
Traxxas Button Head Hex Screw 3x18 Jato (6)
$2.50
TRA2583

These are the Button Head 3mm x 18mm Screws for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Metal construction Black in color

INCLUDES: Six 3mm x 18mm Button Head Screws

REQUIRES: Assembly onto Vehicle

Quantity   
TRA2584.jpg
Traxxas Cap Head Screws 3x12mm (6)
$2.50
TRA2584

These are 3x12mm Cap Head Screws from Traxxas.

FEATURES: Steel Construction Black in color Hex head

INCLUDES: Two 3x12mm cap screws

SPECS: Length: 12mm (.47")

Diameter: 3mm (.12")

Quantity   
TRA2586.jpg
Traxxas Head Screws TRX 2.5 (6)
$2.50
TRA2586

This is a Package of Six 3x15mm Cap Head Machine Screws for the 2.5 Engine.

FEATURES: Black steel construction

INCLUDES: Six 3x15mm cap head machine screws

REQUIRES: 2.5mm ball driver or hex wrench (use DTXR0254)

Quantity   
TRA2590.jpg
Traxxas Machine Screw 3x20mm Nitro Rustler (6)
$1.50
TRA2590

These are the Traxxax 3x20MM Countersunk Machine Screws.

FEATURES: Steel construction. Phillips drive insert. Countersunk head for a smooth flush surface when installed.

INCLUDES: (6) Screws

SPECS: Diameter: 3mm

Length: 20mm

Quantity   
TRA2592.jpg
Traxxas Screws 3x40mm Button-Head Machine Hex Drive (6)
$3.00
TRA2592

These are the Traxxas Button-Head 3 x 40mm Screws.

FEATURES: Metal construction Black in color

INCLUDES: Six 3 x 40mm button-head hex machine screws

REQUIRES: Installation on the vehicle

Quantity   
TRA2632R.jpg
Traxxas Caster Blocks Race Series 30 Degree
$4.50
TRA2632R

This is a set of optional caster blocks for the TRAXXAS TRX-3 2wd electric off road racing buggy.

FEATURES: Made of white nylon

For 30 caster

INCLUDES: One left caster block

One right caster block

COMMENTS: These castor blocks mount onto the front A-arms and the steering blocks mount onto the caster blocks.

Quantity   
Traxxas Suspension Pins 48mm Hard Chrome (2)
$2.50
TRA2639

These are replacement suspension pins for the Traxxas TRX-1 and TRX-3 cars.

PACKAGE INCLUDES:

5- E rings (aluminum)

2- Suspension pins (hard chrome) These are the long pins

SPECS:

Length: 2" (48mm)

Thickness: 1/8"
COMMENTS:
The suspension pins are used with the suspension bars, they help to hold the knuckle arms.

Quantity   
TRA2640.jpg
Traxxas Chrome Suspension Pin w/Clip 44mm (2)
$2.50
TRA2640

This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER.

Includes: two chrome suspension pins and three "E" type retaining clips.

Requires:nothing parts are a direct replacement.Specs:3mm x 44mm pins are notched for the 3MM "E" type retaining clips at each end.

Quantity   
TRA2656.jpg
Traxxas Shock Shafts Hard Chrome (2)
$3.00
TRA2656

This is a set of XXL shock shafts for the Traxxas shocks.

Includes: Two shock shafts

Features: hardened chrome/steel construction

Specs: 2 1/8" long or 54mm

1/16" diameter or 1.5mm

Quantity   
TRA2660.jpg
Traxxas Long Big Bore Shocks w/o Springs (2)
$30.00
TRA2660

These are LONG BIG BORE SHOCKS by Traxxas. They may be used with the TRX-3 (rear) and used to upgrade the Eagle LSII and TRX-1 Fronts.

FEATURES: Pre-assembled shocks only require filling with included oil,attaching included spacers and (not included) springs. Big-bore long shocks are hard-anodized and coated T-6 aluminum.

Quantity   
Traxxas Roundhead Screw 3x10mm (6)
$1.50
TRA2675

These are the Traxxas 3x10mm Roundhead Screws.

FEATURES: Self tapping

Phillips head

INCLUDES: 6 Traxxas 3x10mm Roundhead Screws

SPECS: Diameter: 3mm

Length: 10mm

Quantity   
TRA2676.jpg
Traxxas Roundhead Screw 3x12mm (6)
$1.50
TRA2676

This is a set of Roundheaded Self Tapping Screws by Traxxas.

FEATURES: Steel construction, silver in color

INCLUDES: Six 3x12mm Roundheaded Self Tapping Screws

REQUIRES: Application onto vehicle

SPECS: Length: 12mm

Diameter: 3mm

Quantity   
TRA2682.jpg
Traxxas Roundhead Screw 3x8mm (6)
$1.50
TRA2682

This is a set of Roundhead Screws by Traxxas.

FEATURES: Steel construction, silver in color

INCLUDES: Six 3x8mm Roundhead Screws

REQUIRES: Application onto vehicle

SPECS: Length: 8mm

Diameter: 3mm

Quantity   
TRA2728.jpg
Traxxas Ball Bearings 5x8mm (2)
$8.00
TRA2728

These bearings may be used with Traxxas vehicles or on whatever vehicle they will fit.

PACKAGE INCLUDES: 2-Bearings

SPECS: 5x8x2.5mm

FEATURES:

The bearing are constructed of stainless steel.

Quantity   
TRA2735.jpg
Traxxas Ball Bearings 5x8mm (2)
$8.00
TRA2735

These bearings may be used with Traxxas vehicles or on whatever vehicle they will fit

PACKAGE INCLUDES: 2-Bearings

SPECS: 5x8x2.5mm

FEATURES: The bearing are constructed of stainless steel.

Quantity   
TRA2742.jpg
Traxxas Rod Ends w/Connectors LS2 (6)
$4.00
TRA2742

These are 5.8mm ball ends and balls use in the LS II race truck kit.

Kit includes: 6ea 5.8mm metal balls

6ea 5.8mm white nylon ball ends

Quantity   
TRA2743.jpg
Traxxas Grub Screws 3mm (12)
$3.00
TRA2743

These are 3mm Grub Screws from Traxxas.

FEATURES: Hardened steel construction.

Hexagon socket drive insert.

INCLUDES: (12) Grub Screws

SPECS: Size: 3mm

Quantity   
TRA2745.jpg
Traxxas Nylon Locknuts 3mm (12)
$2.00
TRA2745

These are 3mm Nylon Locking Nuts from Traxxas.

FEATURES: Durable metal construction

Nylon inserts

INCLUDES: (12) Lock Nuts

SPECS: Size: 3mm

Quantity   
TRA2746.jpg
Traxxas Metal Washers 3x6mm (12)
$1.50
TRA2746

These are 3x6mm Washers from Traxxas.

FEATURES: Metal construction

INCLUDES: (12) Washers

SPECS: Size: 3x6mm

Quantity   
Traxxas Stub Axles Pins TRX-1 (4)
$1.00
TRA2754

These are replacement stub axle pins for the Nitro Buggy, Nitro Street, TRX-3,Rad 2, TRX-1, Hawk 2, and Blue Eagle LS II. These pins slide through the axle and hold the wheel to the axle.

INCLUDES: 4- stub axle pins

Quantity   
TRA2760.jpg
Traxxas Shock Caps Aluminum (2)
$7.00
TRA2760

These are the blue anodized aluminum shock caps used on the Nitro Hawk's shocks.

Package includes: 2ea aluminum shock caps

Specs: diameter- 14mm

height- 17mm

Note: These are replacements for the shock caps that come stock on the Nitro Hawk shocks, so all shock parts on the Nitro Hawk are required.

Quantity   
TRA2798.jpg
Traxxas Suspension Arm Mounts +/-1 Degree TRX-1
$2.00
TRA2798

These are replacement suspension arm mounts for the Traxxas TRX-1.

Features: 2 white dyeable nylon susp. arm mounts These are +1 or -1 degrees. You can flip them around for either setting.

Optional: Traxxas has 0 degree blocks(TRAC6797)

Quantity   
TRA3031.jpg
Traxxas AC Power Adapter 3030 Revo
$19.00
TRA3031

is the AC Power Adapter for use with the RX Power Pack hat is included with the Traxxas Revo. It is used in conjunction with the Power Pack to charge the receiver battery.

FEATIRES: Plastic "Wall Wart" AC plug-in design Standard ring/tip charge plug
INCLUDES: One AC Power Adapter

SPECS: Case size: 51mm(L)x 51mm(W)x 76mm(H) (2"L x 2"W x 3"H)
Length of wire: 1905mm (75")
Input Voltage: 110 volts AC
Output Voltage: 12 volts DC
Output MAH: 1000MAH
Polarity: Tip-positive, Ring-negative

Quantity   
TRA3032.jpg
Traxxas DC Power Adapter 3030 Revo
$7.50
TRA3032

This is the DC Power Adapter for the #3030 RX Power Charger for the REVO from Traxxas.

FEATURES: Cigarette lighter plug on one end and a round plug on the other.

INCLUDES: One DC adpater

Quantity   
TRA3060.jpg
Traxxas Male/Female Traxxas Connector (1)
$4.25
TRA3060

This is the Male/Female Traxxas Connectors Plugs Only (No Wires).

FEATURES: Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it impossible to connect backwards
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Secure, positive locking spring loaded terminals for consistent contact
Multiple locking barbs keep terminals secure

INCLUDES: One black female plastic connector
One black male plastic connector
Two sets of gold metal pins
Instruction sheet

REQUIRES: Soldering wires to the metal pins

Quantity   
TRA3061.jpg
Traxxas Adapter Traxxas Male To Std/Molex Female (1)
$5.00
TRA3061

This is the Traxxas Male Connector to Molex Female Connector Adapter.

FEATURES: Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it impossible to connect backwards
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Secure, positive locking spring loaded terminals for consistent contact
Multiple locking barbs keep terminals secure

INCLUDES: One Traxxas male connector to Molex female connector adapter.

COMMENTS: Molex connector not suitable for high current use

Quantity   
TRA3062.jpg
Traxxas Adapter Traxxas Female To Std/Molex Male (1)
$5.50
TRA3062

This is the Traxxas Female Connector to Molex Male Connector Adapter.

FEATURES: Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it impossible to connect backwards
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Secure, positive locking spring loaded terminals for consistent contact
Multiple locking barbs keep terminals secure

INCLUDES: One Traxxas female connector to Molex male connector adapter

COMMENTS: Molex connector not suitable for high current use

Quantity   
TRA3063.jpg
Traxxas Series Battery Connection Wire Harness 1/16 V
$8.00
TRA3063

This is the Series Battery Connection Wire Harness for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES: Traxxas High Power Connectors
Combines voltage of connected batteries for increased speed

INCLUDES: One Wire Harness with instruction sheet

REQUIRES: Installation between batteries and ESC

Quantity   
TRA3070.jpg
Traxxas Male Traxxas Connector (2)
$3.75
TRA3070

These are the Male Traxxas Connectors Plugs only (No Wires).

FEATURES: Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it impossible to connect backwards
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Secure positive locking spring loaded terminals for consistent contact
Multiple locking barbs keep terminals secure

INCLUDES: Two black male plastic connectors
Two sets of gold metal pins
Instruction sheet

REQUIRES: Soldering wires to the metal pins

Quantity   
TRA3156.jpg
Traxxas Header & Fitting Gaskets
$1.75
TRA3156

This is the replacement gasket set for the Traxxas Nitro Hawk Image .12 exhaust header.

Includes: 1- Exahust header gasket
2- Exhaust bolt gaskets

Quantity   
TRA3159.jpg
Traxxas Hex Screws 3x10mm Nitro Hawk (6)
$2.75
TRA3159

These are stock replacement screws for the Traxxas Nitro-Hawk truck kit.

FEATURES: Steel construction
Cap head with hexagon socket drive insert
Metal lock washers

INCLUDES: (6) Screws
(6) Lock Washers
(1) Hex Wrench

SPECS: Screws: Diameter: 3mm
Length: 10mm

Lock Washers: Inner Diameter: 3mm
Outer Diameter:4mm

Quantity   
TRA3167.jpg
Traxxas Countersunk Screw 4x15mm (6)
$1.50
TRA3167

This is a package of 4x15mm Countersunk Machine Screws from Traxxas. These screws can be used anywhere this size is required.

FEATURES: Steel construction
Silver in color
Flat head, countersunk screw with a phillips drive insert

INCLUDES: Six 4x15mm flathead countersunk machine screws

Quantity   
TRA3177.jpg
Traxxas Countersunk Screws 3x10mm Nitro Hawk (6)
$1.50
TRA3177

This is a set of 3x10mm Countersunk machine screws for the Traxxas Nitro Hawk.

FEATURES: Metal construction
Countersunk (flat head) machine screws
Phillips drive insert
Replacement parts designed for the Traxxas Nitro Hawk

INCLUDES: Six Screws

SPECS: Length: 10mm
Diameter: 3mm

Quantity   
TRA3178.jpg
Traxxas Screws 3x12mm LS II (6)
$1.50
TRA3178

These are countersunk Machine Screws from Traxxas.

FEATURES: stainless steel construction
phillips drive
replacement screws used on the Traxxas LS-II

INCLUDES: (6) Screws

SPECS: Size: 3x12mm

COMMENTS: when screwed-in the head of the screw is usually flush with the surface

Quantity   
tra3179.jpg
Traxxas Screws 3x15mm LS II (6)
$1.50
TRA3179

These are countersunk Machine Screws from Traxxas.

FEATURES: stainless steel construction
phillips drive
replacement screws used on the Traxxas LS-II

INCLUDES: (6) Screws

SPECS: Size: 3x15mm

COMMENTS: when screwed-in the head of the screw is usually flush with the surface

Quantity   
TRA3180.jpg
Traxxas Rod Guides/Nuts Nitro Hawk (2)
$2.25
TRA3180

These are the Rod Guides w/nuts for the Traxxas Nitro Hawk.

Features: metal construction

Includes: two rod guides and two nuts.

Specifications:
-Rod Guides, measures 13mm tall and the head diameter is 5mm wide

Comments: the rod guides are used with the TRAC3281(throttle servo horn), for operation of throttle and brake.

Quantity   
tra3186.jpg
Traxxas Washer Head Machine Screws 3x12mm N Hawk (6)
$1.50
TRA3186

These are 3x12mm Washerhead Machined Screws from Traxxas

FEATURES: Steel construction
Phillips drive insert
Flanged pan head
Replacement parts designed for the Traxxas Nitro Hawk
INCLUDES: (6) Screws

SPECS: Diameter: 3mm
Length: 12mm
Quantity   
tra3215.jpg
Traxxas Back Plate Screws 2.5x6mm (6)
$2.00
TRA3215

This is the stock replacement backplate screw set for the Image .12 Traxxas engine.

Features: cap-head aluminum design

Includes 6 2.5x6mm cap-head (sockethead) screws

Quantity   
tra3235.jpg
Traxxas G Spring Retainer (3)
$1.50
TRA3235

This is a part for the Image .12 engine from Traxxas. On the later engines this is a replacement part. On the earlier engines this is an upgrade over the plastic wrist pads.

This Package Includes:
(3) G-pin retainers - These are the retainers that holds the piston pin
(AKA wrist pin) from coming loose inside the cylinder. These fit into the groove in the sides of the piston.

Comments:
Traxxas suggests that you install these inside of a box to prevent losing the spring (they easily spring loose when installing).

Quantity   
tra3281.jpg
Traxxas Cone Split Beveled
$3.00
TRA3281

Replacement SPLIT BEVEL CONE for the Traxxas Nitro Vee Boat. This cone is part of the engine assembly. (Image .12)

PACKAGE INCLUDES:
1-Beveled Cone

FEATURES:
Black steel construction
Beveled cone shape with split on one side

COMMENTS:
Beveled cone sits in front of the flywheel

Quantity   
tra3290.jpg
Traxxas Screws 3x8mm Washerhead Self-Tapping (6)
$1.50
TRA3290

This is a package of Six 3x8mm Washer Head Self Tapping Screws from Traxxas.

FEATURES: Steel construction

INCLUDES: Six 3x8mm Washer Head Self Tapping Screws

REQUIRES: Phillips screwdriver, DTXR0172

SPECS: Length: 8mm

Quantity   
tra3296.jpg
Traxxas Fittings Inlet T-Maxx 2.5 (2)
$2.75
TRA3296

These are the replacement Fuel Inlet Fittings from Traxxas. This will work for the Traxxas T-Maxx.

FEATURES: Aluminum inlet fittings

INCLUDES: Two fittings

REQUIRES: Nothing

COMMENTS: These fittings are for the tuned-pipe and fuel tank for the T-Maxx.

Quantity   
TRA3340.jpg
Traxxas Cooling Fan Velineon VXL-3 ESC
$25.00
TRA3340

This is the optional Cooling Fan for the Traxxas Velineon VXL-3 Electronic Speed control.

FEATURES: Keeps your VXL-3 running cooler
Simple installation requires only snapping the fan housing on the ESC and plugging in the connector on the ESC to the fan

INCLUDES: One Cooling Fan Unit with installation sheet

REQUIRES: Installation following the included instructions

SPECS: Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) including clips - .47" (12mm) not including clips

Quantity   
tra3352.jpg
Traxxas Rebuild Kit Velineon 3500 Motor
$13.00
TRA3352

This is the Rebuild Kit for the Traxxas Velineon 3500 Brushless motor - TRAC3351.

FEATURES: Improves performance of an old motor
Step-by-step instruction sheet guides you through the process

INCLUDES: Two 5 x 11 x 5mm Bearings
One 5 x 7 x 13mm Brass Bushing
One 5 x 7 x 5.6mm Brass Bushing
Four 2.5 x 5mm Button Head Screws

REQUIRES: Removal of old parts and installation of new parts following the included instruction sheet

Quantity   
tra3570.jpg
Traxxas Aluminum Mount Nitro 4-Tec
$5.00
TRA3570

This is the Aluminum Mount for the Nitro 4-Tec.

FEATURES: Pre-bent aluminum mount

INCLUDES: One mount

REQUIRES: Traxxas Nitro 4-Tec

SPECS: Length: 39 mm (1.534")
Width: 14 mm (0.55")
Height: 13 mm (0.51")

Quantity   
tra3614.jpg
Traxxas Body Mounts Front & Rear Stampede
$5.00
TRA3614

These are the replacement body mounts for the Traxxas Stampede truck. They are constructed of black plastic and are the posts that the lexan truck body attaches to.

PACKAGE INCLUDES:
One front body mount
One rear body mount

COMMENTS: Does not include body clips

Quantity   
TRA3725.jpg
Traxxas Idler Gear Steel 30T
$3.00
TRA3625

This is the optional Steel Idler Gear for many Traxxas Vehicles.

FEATURES: Steel construction

INCLUDES: One steel 30T idler gear

REQUIRES: Installation on vehicle

Quantity   
tra3628.jpg
Traxxas Reciever Box Stampede/Rustler/Bandit
$12.00
TRA3628

This is the Receiver Box for use on the Traxxas Stampede, Rustler, and Bandit Vehicles.

FEATURES: Nylon construction
Black in color

INCLUDES: One Receiver Box
One Rubber Seal
Foam Padding
Two 2.5x8mm Cap Head Screws
Two 3x10mm Cap Head Screws
Two 2.5x10mm Cap Head Screws
One Tube of Grease
Instruction sheet
REQUIRES: Installation on the vehicle

SPECS: Length: 78mm (3.07")
Width: 35mm (1.4")
Height: 33mm (1.3")

tra3631.jpg
Traxxas Suspension Arms Front (2)
$8.00
TRA3631

This is the Traxxas replacement #3631 Front Suspension Arms for the Stampede and Rustler.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede and Rustler.

SPECS:
Length: 3 1/4"
Thickness: 3/8"
Width at end near chassis: 1 1/2"
Width at end near wheels: 7/8"

INCLUDES:
(2) Front suspension arms for the Traxxas Stampede. ,

Quantity   
tra3632.jpg
Traxxas Caster Blocks Left/Right
$4.00
TRA3632

These are Castor Blocks for the Traxxas Rustler and Stampede.

FEATURES: Black Plastic Construction

INCLUDES: Two Blocks

REQUIRES: Traxxas Rustler or Stampede

tra3636.jpg
Traxxas Steering Block (2)
$3.00
TRA3636

Traxxas Stampede and Rustler trucks. They are made of black reinforced nylon and are what the front axles go through.

PACKAGE INCLUDES: Two steering blocks (one left and one right)

Not for the Nitro Stampede.

Quantity   
TRA3638.jpg
Traxxas Shock Tower Rear
$4.50
TRA3638

This is the stock replacement REAR shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Width at top: 4 5/16"
Width at bottom: 2 1/4"
Thickness: 1/4"
Height: 2 13/16"

INCLUDES:
(1) Rear shock tower for the Traxxas Stampede

TRA3639.jpg
Traxxas Shock Tower Front
$4.00
TRA3639

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Height: 2 3/4"
Thickness: 1/4"
Width at base: 2 3/4"
Width at top: 2"

INCLUDES:
(1) Front shock tower for the Traxxas Stampede

TRA3640.jpg
Traxxas Suspension Screw Pin Set Steel (10)
$4.50
TRA3640

These are the Suspension Screws Pins for the Traxxas Rustler, Stampede and Bandit. The hinge pins hold the suspension arms to the bulkheads.

FEATURES: Durable steel construction

INCLUDES: Two 48mm pins
Two 34mm pins
Two 30mm pins
Two 28mm pins
Two 25mm pins

REQUIRES: Installation on the Rustler, Stampede or Bandit

COMMENTS: For a complete suspension pin set order TRAC4940

Quantity   
TRA3642.jpg
Traxxas Shoulder Screws 3x12x5mm (6)
$3.00
TRA3642

This is a Package of 3x12x5mm Shoulder Screws for many Traxxas Vehicles.

FEATURES: Black steel construction
Screws are half-threaded/half-smooth
Phillips head

INCLUDES: Six 3x12x5mm shoulder screws

SPECS: Length: 12mm (.47")
Diameter: 3mm (.12")
Thread Length: 5mm (.20")

Quantity   
TRA3647.jpg
Traxxas Nuts 4mm Flanged Nylon Locking Steel (8)
$3.25
TRA3647

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES: Steel serrated construction

INCLUDES: Eiqht 4mm flanged nylon locking nuts

SPECS: Outside diameter: 7mm

Quantity   
TRA3654.jpg
Traxxas Hex Wheel Hub 2.5x12mm Fr Rustler/Stampede (2)
$3.00
TRA3654

This is a Hex Wheel Hub Set for the Traxxas Rustler and Stammpede. These parts have more offset than the stock hex wheel hub set (TRAC6044).

FEATURES: Gray plastic construction

INCLUDES: Two wheel hubs
Two 2.5mmX12mm axle pins

SPECS: Hex size: 12mm
Width: .32" (8mm)

Quantity   
TRA3677.jpg
Traxxas Wheelie Bar Mount Stampede/Rustler/Bandit
$4.00
TRA3677

This is an optional Wheelie Bar Mount for the Traxxas Electric Stampede, Rustler and Bandit.

FEATURES: Constructed of hardened plastic, black in color
Installs at rear of chassis to hold wheelie bar arm and wheels in place

INCLUDES: Assembled optional Wheelie Bar Mount with mounting instructions and hardware

REQUIRES: Wheelie Bar Arm (TRAC9574)
Wheels and Axles (TRAC9576)

Quantity   
TRA3678.jpg
Traxxas Wheelie Bar Assembly Stampede/Rustler/Bandit
$15.00
TRA3678

This is an optional Wheelie Bar for the Traxxas Electric Stampede, Rustler and Bandit.

FEATURES: Constructed of hardened plastic, black in color
Installs at rear of chassis to prevent vehicle from flipping over during wheelies

INCLUDES: Assembled optional Wheelie Bar with mounting instructions and hardware

REQUIRES: Fastening to rear of chassis

Quantity   
TRA3691A.jpg
Traxxas Gear Box Left/Right w/Idler Gear Shaft Gray
$8.00
TRA3691A

This is a Left and Right Gearbox half with Idler Shaft for the Traxxas Stampede and Traxxas Rustler. /BR>
FEATURES: Gray plastic construction
Steel idler shaft

INCLUDES: One gearbox
One idler shaft

COMMENTS: This part fit the standard and XL version of both the Stampede and Rustler.

Quantity   
tra3692.jpg
Traxxas Dust Cover
$3.50
TRA3692

This is a stock replacement dust cover for the Traxxas Rustler.

FEATURES:
Made from black molded nylon
For the Traxxas Rustler

INCLUDES:
(1) Dust cover for the Traxxa Rustler
(2) 3 x 6 mm round head coarse thread screws (Used to mount the dust cover)

COMMENTS: This is also used for the Electric Stampede

Quantity   
TRA3696.jpg
Traxxas Idler Gear Steel 30T
$3.00
TRA3696

This is the optional Steel Idler Gear for many Traxxas Vehicles.

FEATURES: Steel construction

INCLUDES: One steel 30T idler gear

REQUIRES: Installation on vehicle

Quantity   
TRA3727A.jpg
Traxxas Battery Hold-Down Plate Gray (2)
$3.00
TRA3727A

This is a Left and Right Gearbox half with Idler Shaft for the Traxxas Stampede and Traxxas Rustler.

FEATURES: Gray plastic construction
Steel idler shaft

INCLUDES: One gearbox
One idler shaft

COMMENTS: This part fit the standard and XL version of both the Stampede and Rustler.

Quantity   
TRA3736.jpg
Traxxas Steering Blocks Left & Right (2)
$3.00
TRA3736

These are the Left and Right Steering Blocks for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES: Plastic construction
Black in color

INCLUDES: One left and right steering blocks

REQUIRES: 5x11x4mm bearings (DTXC1547)

Quantity   
TRA3739.jpg
Traxxas Screw Pin Set (10)
$4.50
TRA3739

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede and Rustler trucks. They are constructed of chrome-plated steel and used to hold the suspension arms to the chassis and the hubs.

PACKAGE INCLUDE:
Two 3mm x 46mm screw pins
Two 3mm x 40mm screw pins
Two 3mm x 29mm screw pins
Two 2mm x 27mm screw pins
Two 2mm x 24mm screw pins

Quantity   
TRA3740.jpg
Traxxas Pins 2.5x31.5mm Rustler (2)
$2.50
TRA3740

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made of stainless steel
This is used to hold the front steering block (TRAC9036 #3636) to the castor block (TRAC9032 #3632) on the electric (not Nitro) Rustler
Also called the vertical kingpin

INCLUDES:
2 Pins (kingpins)
4 2.5mm e-clips

Quantity   
TRA3742.jpg
Traxxas Steering Screws 3x30mm (4)
$2.00
TRA3742

These are Replacement Steering Hardware from Traxxas.

FEATURES: Metal construction.
Chrome draglink shoulder screws with a phillips drive.
Black steering bellcrank shoulder screws with a hexagon socket drive.
Coarse thread.

INCLUDES: (2) Bellcrank Screws
SPECS: Bellcrank Size: 3x30mm
Draglink Size: 3x5mm

Quantity   
TRA3744.jpg
Traxxas Servo Saver
$4.00
TRA3744

This is the replacement servo saver for the following Traxxas kits: Rustler and Stampede. The servo saver is spring loaded and has adaptors for both Futaba and Airtronics servos.
Spring loaded
Two adaptors-Futaba and Airtronics

Quantity   
TRA3760.jpg
Traxxas Black Shocks Long (2)
$18.00
TRA3760

This is a pair of replacement front shocks for the Traxxas Stampede and Rustler trucks. The shock bodies are made of black plastic and there are four spring pre-load spacers (to vary the spring tension) for each shock.

PACKAGE INCLUDES:
Two UNASSEMBLED long front shocks with pre-load spacers
Two medium springs (TRAC9158)
One 1/2 ounce bottle shock oil (approx. 30 weight, TRAC5666)

COMMENTS: Instructions are not included for assembling these shocks, refer to the truck kit instructions.

Quantity   
TRA3762A.jpg
Traxxas Rear Ultra Shocks T-Maxx (2)
$18.00
TRA3762A

This is a pair of the Ultra Shocks for the Traxxas T-Maxx 3.3.

FEATURES: Gray composite bodies
Stock replacement T-Maxx 3.3 unassembled shocks
Preload spacers and two red springs

INCLUDES: Two Ultra Shocks for the Traxxas T-Maxx 3.3 with bottle of silicone oil and assembly diagram

REQUIRES: Assembly

COMMENTS: Two pairs are required if replacing all shocks. Progressive Rate White Springs are also available, TRAC9557.

Quantity   
TRA3767A.jpg
Traxxas Aluminum Shock Caps Anodized Blue (4)
$14.00
TRA3767A

These are the Blue Aluminum Shock Caps from Traxxas.

FEATURES: Aluminum construction
Anodized blue in color
Fits all Ultra Shocks

INCLUDES: Four Shock Caps

REQUIRES: Installation on the shocks

Quantity   
TRA3768.jpg
Traxxas Spring Retainers (2)
$3.00
TRA3768

These are the Traxxas Spring Retainers for Traxxas Shocks. This set contains the spring retainers that hold the springs in place over the shock body and the piston heads that control the amount of oil flow in the shock cylinder.

FEATURES: Constructed of molded plastic.
Contains enough parts for two shocks. Two hole piston head for greater dampening or three hole piston head for softer spring performance.

INCLUDES: One Traxxas Spring Retainer Set with:
Two upper and two lower spring retainers
Two 2 hole piston head covers
Two 3 hole piston head covers

REQUIRES: Disassembly of shock to install parts.

Quantity   
TRA3775.jpg
Traxxas Oilite Bushings (12)
$5.00
TRA3775

This is a package of bronze oilite bushings for the Traxxas Stampede and Rustler trucks. These trucks use eight of these bushings, so there will be four left over (spares).

Quantity   
TRA3785.jpg
Traxxas Titan 550 Motor 12T Stampede/Rustler
$26.00
TRA3785

This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES: Stock motor supplied with the Traxxas Stampede and Rustler series Preinstalled leads, capacitors and connectors

INCLUDES: Traxxas Titan 550 Motor, two capacitors and two leads with connectors

REQUIRES: Installing in vehicle

SPECS: Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specs such as RPM are not provided

Quantity   
tra3792.jpg
Traxxas Dust Cover/Rubber Plug w/Screws
$3.50
TRA3792

This is a Dust Cover and Rubber Plug for the Traxxas Rustler/Stampede

FEATURES: Made from black molded nylon
For the Traxxas Rustler/Stampede

INCLUDES: Dust cover for the Traxxa Rustler 3 x 6 mm round head coarse thread screws (to mount dust cover) Rubber Plug

Specs: 3" (77mm)
Compatible with Traxxas Telemetry

Quantity   
tra3793.jpg
Traxxas Shaft Slipper Clutch w/Roll Pin
$3.00
TRA3793

This is a Slipper Clutch Shaft for the Traxxas Rustler XL and Stampede XL.

FEATURES: Steel construction
INCLUDES: One slipper clutch set

SPECS: Length: 1.98" (50mm)
Diameter: .21" ( 5mm)

COMMENTS: This part will fit both the standard and XL version of the Rustler or Stampede.

Quantity   
tra3924.jpg
Traxxas Receiver Box E-Maxx
$12.00
TRA3924

This is the Receiver Box for the Traxxas E-Maxx Truck.

FEATURES: Replaces damaged receiver boxes
Constructed of black plastic

INCLUDES: One top and bottom half receiver box for the Traxxas E-Maxx Hardware

REQUIRES: Installing receiver and bolting receiver box to chassis.

tra3930.jpg
Traxxas Bulkhead Cross Brace E-Maxx (2)
$3.50
TRA3930

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx. These Braces are located in between the bumper mounts.

FEATURES: Black nylon construction

INCLUDES: Two Bulkhead Cross Braces
Eight 3x25mm round head screws

REQUIRES: Installation onto and E-Maxx.

SPECS: Mounting holes on-center: 19mm
Bulkhead width: 29mm
Bulkhead height: 28mm
Quantity   
tra3937.jpg
Traxxas Button Head Machine Screw 4x12mm Revo (6)
$2.50
TRA3937

This is a Traxxas 4X12mm Button Head Screw Set.

FEATURES: Steel construction
Black in color
Low-profile, button-head design
Hex drive (allen type)

INCLUDES: Six Screws

REQUIRES: Assembly to vehicle

SPECS: Overall Length: 12mm (.63")
Threaded Length: 11mm (.45")
Thread Size: M4x.7mm coarse
Hex Wrench Size 2.5mm

COMMENTS: Used on the Revo to mount the transmission skid plate.

Quantity   
tra3940.jpg
Traxxas Button Head Screw 4x4 Aluminum Blue Jato (6)
$3.50
TRA3940

These are Button Head Screws 4mm x 4mm for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Aluminum Construction
Blue in Color

INCLUDES: Six Button Head Aluminum 4mm x 4mm Screws

REQUIRES: Assembly onto Vehicle

Quantity   
tra3953.jpg
Traxxas Spur Gear 1.0P 36T Revo
$3.00
TRA3953

This is the replacement 36T Module 1.0 Pitch for the Traxxas Nitro Revo Monster Truck.

FEATURES: Nylon Construction
Black in Color

INCLUDES: One Black Nylon 36T Module 1.0 Pitch Spur Gear

REQUIRES: Assembly onto Vehicle

Quantity   
tra3954.jpg
Traxxas Spur Gear 1.0P 38T Revo
$3.00
TRA3954

This is a 38T Spur Gear for the Traxxas Revo.

FEATURES: Black plastic construction
Three countersunk mounting holes

INCLUDES: One 38T spur gear Part #3954

REQUIRES: Installation on the Traxxas Revo

SPECS: Number of teeth: 38
Diameter: 1.58" (40mm)
Pitch: 1.0 metric

Quantity   
tra3955.jpg
Traxxas Spur Gear 1.0P 40T Revo
$3.00
TRA3955

This is a replacement 40T Spur Gear for the Traxxas Revo. This gear meshes with the clutch bell.

FEATURES: Black plastic construction

INCLUDES: One 1.0 metric pitch 40T spur gear

REQUIRES: Nothing. This is a direct replacement part.

Quantity   
tra3956.jpg
Traxxas Spur Gear 0.8P 54T Jato
$3.00
TRA3956

This is the 54 Tooth Spur Gear for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Nylon construction
Black in color
.8 Module pitch

INCLUDES: One 54T 0.8 Pitch Spur Gear

REQUIRES: Assembly onto vehicle

Quantity   
tra3958.jpg
Traxxas Spur Gear 0.8P 58T Jato
$3.00
TRA3958

This is the 58 Tooth Spur Gear for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Nylon construction
Black in color
.8 Module pitch

INCLUDES: One 58T 0.8 Pitch Spur Gear

REQUIRES: Assembly onto vehicle

Quantity   
tra3961.jpg
Traxxas Spur Gear 0.8P 68T E-Maxx
$3.00
TRA3961

This is the optional .8 Metric Pitch 68 Tooth Spur Gear for the Traxxas E-Maxx.

FEATURES: Nylon construction, black in color .8 metric pitch

INCLUDES: One 68T 0.8 metric pitch spur gear

REQUIRES: Installation on the vehicle

SPECS: Diameter: 2.16" (55mm)
Thickness: .23" (6mm)
Quantity   
tra3965.jpg
Traxxas Cap Head Machine Screw 2.5x8mm Revo (6)
$2.50
TRA3965

This is a 6 pack of Traxxas 2.5X8mm Cap Head Screws.

FEATURES: Steel construction
Black in color >BR> Cap head design

INCLUDES: (6) 2.5X8mm cap head screws

SPECS: Length: 5/16" (8mm)
Diameter: 3/32" (2.5mm)

Quantity   
tra3966.jpg
Traxxas Shoulder Screw 3x10mm Revo (6)
$3.50
TRA3966

This is the 3x10mm Shoulder Screw Set for the Traxxas Revo.

FEATURES: Steel construction
Top Shoulder design (not threaded)
Used for attaching the Throttle Bellcrank to Revo chassis

INCLUDES: Six Screws

REQUIRES: Assembly to vehicle

SPECS: Overall Length: 12mm (.47")
Length, bottom of head to end of screw: 10mm (.39")
Shoulder Length: 6mm (.24")
Shoulder Diameter: 5mm (.20")
Threaded Length: 4mm (.16")
Thread Size: M3x.5mm coarse
Hex Wrench Size 2.5mm

Quantity   
tra3969.jpg
Traxxas Output Shaft Transmission E-Maxx
$7.50
TRA3969

This is the Transmission Output Shaft for the Traxxas E-Maxx.

FEATURES: Metal construction, black in color

INCLUDES: One transmission output shaft, Part #5369

REQUIRES: Installation on the Traxxas E-Maxx

SPECS: Overall length: 2.75" (70mm)
Diameter of drive dog mount: .39" (10mm)
Diameter of shaft: .23" (6mm)
Quantity   
tra3979.jpg
Traxxas Housings Diff Left & Right E-Maxx
$4.00
TRA3979

These are the Left and Right Differential Housings for the Traxxas E-Maxx.

FEATURES: Constructed of plastic
Replaces damaged or broken diff housings

INCLUDES: Left and Right Differential Housings and Pinion Collar

REQUIRES: Installing all internal diff components

Quantity   
tra3985x.jpg
Traxxas Output Gears 33T E-Maxx
$6.00
TRA3985X

This is the Output Gear Set for the Traxxas E-Maxx.

FEATURES: White plastic construction

INCLUDES: Two 33 tooth output gears, drive dog carrier and output shaft spacer

REQUIRES: Installation into transmission

Quantity   
tra3987.jpg
Traxxas Rubber Gear Cover E-Maxx
$4.50
TRA3987

This is the Replacement Gear Cover and Rubber Plug for the Traxxas E-Maxx. This piece screws onto the motor plate.

FEATURES: Black nylon construction

INCLUDES: One Gear Cover
One Rubber Gear Cover Plug
Four 3mm Cap Head hex screws

REQUIRES: Installation onto the motor plate.

SPECS: Diameter of Rubber Plug: 16mm

Quantity   
tra3995x.jpg
Traxxas Shafts/Idler Gear E-Maxx
$3.50
TRA3995x

These are the Idler Gear Shafts for the Traxxas E-Maxx Monster Truck.These shafts are installed in the center section of the the Gearbox (key #3991)and support the Idler Gears (key #3996).

FEATURES: Replaces worn gear shafts.
Constructed of Lightweight 7075 T-6 aluminum hard anodized/coated.

INCLUDES: Two Idler Gear Shafts

REQUIRES: Disassembly of gearbox to install the gears.

Quantity   
tra4011.jpg
Traxxas Bearing One-Way Starter TRX .15
$15.00
TRA4011

This is the Stock replacement One-Way Bearing for the Traxxas engines. This bearing is located on the starter shaft.

FEATURES: Steel construction
Roller bearing design

INCLUDES: One One-Way Bearing

REQUIRES: Nothing. This is a direct replacement part.

SPECS: Inner bearing diameter: 6mm (0.24")

COMMENTS: This bearing is unique to this engine, and cannot be substituted by another bearing.

Quantity   
tra4042.jpg
Traxxas Dust Boot/Throttle TRX .12
$1.75
TRA4042

FEATURES: head is same dimensions and specs as the original, and is a direct bolt on item. Made from machined aluminum. This head is water cooled.

INCLUDES: one main cylinder head, and spacer. two water inlet connectors, and two inlet gaskets.

REQUIRES:head must be bolted on, use TRAXXAS screws 3229 TRAG3229

COMMENTS: this is for the TRX-12 only,it will NOT fit the newer TRX-15

tra4047.jpg
Traxxas O-Ring Set TRX .12
$2.50
TRA4047

This is a O-Ring Set for the TRX .12 Traxxas Engine. The O-rings are for the carb base and the needle valves.

FEATURES: 7 rubber O-rings of various sizes for the carb base, air filter adapter, high speed needle, and low speed spray bar

INCLUDES: 2 2.5mm o-rings, 2 4mm o-rings, 1 5.5mm o-ring, 1 1mm o-ring; 1 blue 3mm O-ring

REQUIRES: Carb for TRX .12

Quantity   
tra4060.jpg
Traxxas Air Filter Complete Nitro
$6.00
TRA4060

This is the Air Filter for Traxxas Nitro Powered Vehicles. This Filter fits over the carburetor and prolongs engine life by preventing dirt from entering engine.

FEATURES: Constructed of black rubber with oiled foam insert.

INCLUDES: One Air Filter for Traxxas Nitro Powered Vehicles with rubber boot, tie strap, and foam insert.

REQUIRES: Installing boot over carburetor opening and securing with tie strap.

SPECS: Height: 1.30" (33mm)
Diameter of boot at carburetor opening: 0.31" (8mm)

Quantity   
tra4070.jpg
Traxxas Assembled Pull Starter TRX .15
$18.00
TRA4070

This is the Replacement Recoil Starter Assembly for the Traxxas TRX-12, TRX-15 and Pro-15 Engine.

INCLUDES: One Recoil Starter Unit w/String and Handle Installed

COMMENTS: This doesn't have the backplate or any of the attachment hardware. For the One-Way Bearing, use TRAG4011

Quantity   
tra4118.jpg
Traxxas Clutch Bell Steel 18T
$12.00
TRA4118

This is the Traxxas 18 Tooth Steel Replacement Clutch Bell. This clutch attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.

FEATURES: Fits all Traxxas 1/10th scale nitro vehicles.
Replaces worn or damaged clutch bells.
Constructed of hardened steel.

INCLUDES: One Traxxas 18 Tooth Steel Replacement Clutch Bell.
Two 5mm x 10mm 0.5mm fiber washers.
Two 5mm E-clips.

REQUIRES: Disassembly of flywheel, clutch shoes, and adapter unit.
Two 5mm x 10mm bearings

Quantity   
tra4132.jpg Traxxas Bumper/Battery Box/Clips Stampede
$7.00
TRA4132

This is the Rear Bumper (Battery Box) for the Nitro Stampede.

FEATURES: Durable black plastic construction

INCLUDES: One rear bumper
Two Body Clips (holds the battery cover on)
One battery box
One easy start connector mount with two screws.

REQUIRES: Installing on the vehicle

BOX BUMPER
SPECS: Length: 66.8mm 72.2mm
Width: 38.4mm 66.8mm
Height: 36.9mm 31.3mm

Quantity   
tra4133.jpg
Traxxas Skid Plates/Fiberglass Transmission
$7.00
TRA4133

This is the front and rear skid plates & fiberglass tranny spacer plate for the TRAXXAS NITRO STAMPEDE truck.

INCLUDES: (1) Fiber-reinforced plastic front skid plate
(1) Fiber-reinforced plastic rear skid plate
(1) Fiberglass tranny spacer plate

Quantity   
tra4138.jpg
Traxxas Shock Tower Rear Stampede
$4.50
TRA4138

This is the stock replacement REAR shock tower for the Traxxas Nitro Stampede and Nitro Rustler. FEATURES: Made from black molded nylon
For the Traxxas Nitro Stampede and Nitro Rustler

SPECS: Width at top: 4 1/2"
Width at bottom: 1 9/16"
Thickness: 1/4"
Height: 2 1/2"
INCLUDES: One Rear Shock Tower for the Traxxas Stampede

Quantity   
tra4142.jpg
Traxxas Flywheel Stampede
$7.50
TRA4142

This is the aluminum 2-pin flywheel used on the Traxxas Stampede truck.

INCLUDES: (1) Aluminum 2-pin flywheel

SPECS: diameter - 32mm
width - 6mm

Quantity   
tra4146x.jpg
Traxxas Clutch Shoes/Spring T-Maxx
$7.75
TRA4146X

These are Replacement Clutch Shoes for the Traxxas T-Maxx. These mount to the flywheel and engage the clutch.

FEATURES: Carbon Construction
Black in Color

INCLUDES: Two Clutch Shoes
One Spring

REQUIRES: Assembly into the clutch system.

Quantity   
tra4147.jpg
Traxxas Nylon Locknuts 5mm (8)
$2.00
TRA4147

These are 5mm Nylon Locknuts by Traxxas.

FEATURES: Chromed steel construction.
Nylon inserts.

INCLUDES: Eight 5mm locknuts.

SPECS: Thickness: 4.95mm (.195")

Quantity   
tra4154.jpg
Traxxas Exhaust Tip Rubber Stampede
$4.00
TRA4154

This is the Exhaust Tip for the Traxxas Nitro Stampede Monster Truck. These Tips are installed on either end of the muffler to direct the exhaust to the rear of the vehicle.

FEATURES: Constructed of rubber.

INCLUDES: One Exhaust Tip for the Traxxas Nitro Stampede Monster Truck.

REQUIRES: Placing on end of muffler and securing with Tie Wrap (TRAC3255) and Heat Shields (TRAC9449)

SPECS: Length: 3.07" (78mm)
Diameter where muffler attaches: 1" (26mm)
COMMENTS: Two Tips are required per vehicle.
Quantity   
tra4181.jpg
Traxxas Differential Gear/Side Cover Plate/Screw
$3.50
TRA4181

This is a Diff Gear and Side Coverplate with Screws by Traxxas.

FEATURES: White plastic construction.

INCLUDES: One 45 Tooth differential gear.
One differential gear side coverplate.
Four countersunk screws.

REQUIRES: Assembly in vehicle.

SPECS: Outside diameter: 37.5mm (1.48")
Shaft diameter: 5.10mm (.200")
Overall thickness: 21.2mm (.834")

Quantity   
tra4185.jpg
Traxxas Brake Disc/Shaft Adapter
$3.00
TRA4185

This is the Brake Disc and Shaft Adapter for the Traxxas Nitro Rustler and Nitro Stampede.

FEATURES: Plastic/Fiber-reinforced Brake Disc
Steel Center Shaft Adapter

INCLUDES: One Brake Disc
One Center Shaft Adapter

REQUIRES: None, item is a stock replacment part.

SPECS: Brake Disc Inside diameter: 14.5mm (.57")
Brake Disc Outside diameter: 30.5mm (1.2")
Brake Disc Thickness: 3.4mm (.134")

COMMENTS: Center of Brake disc is "keyed" to keep it stationary when assembled along with the Center Shaft Adapter.

Quantity   
tra4192a.jpg
Traxxas Bulkhead Rear Gray
$3.00
TRA4192A

This is the Rear Grey Bulkhead for the Traxxas Nitro Stampede, TRAC85**.

FEATURES: Sturdy grey nylon construction

INCLUDES: One rear bulkhead for the Traxxas Nitro Stampede

REQUIRES: Installation onto the chassis

SPECS: Width: 2.63" (67mm)
Height: 1.81" (46mm)

Quantity   
tra4193.jpg
Traxxas Top Drive Gear Stampede
$4.50
TRA4193

This is a Top Drive Gear for the Traxxas Stampede.

FEATURES: Silver steel construction.

INCLUDES: One Top Drive Gear.

REQUIRES: Assembly in vehicle.

SPECS: Overall length: 55.8mm (2.20")
Diameter of shaft: 5.10mm (.200")
Diameter of gear: 11.26mm (.444")
Number of teeth: 13
COMMENTS: This gear's shaft is hexed near one end with threading beyond the hex.
Quantity   
tra4215.jpg
Traxxas Rear Body Mount Base Street Sport
$4.00
TRA4215

This is the Stock Replacement Rear Body Mount Set for the Traxxas Street Sport. These are located on the rear gearbox.

INCLUDES: One rear body mount base
Two square rear body mounting posts
Four rear body mounting clamps
Four 3x14mm flanged self-tapping screws (phillips head)

Quantity   
tra4255.jpg
Traxxas OUTPUT YOKES/SHAFTS.
$6.50
TRA4255

Output yokes/shafts, diff (2) assembled with shafts and u-joints attached.

Quantity   
tra4317.jpg
Traxxas Rear Shock Tower 4-Tec
$3.00
TRA4317

This is the Rear Shock Tower for the Traxxas Nitro and Electric 4-Tec Four Wheel Drive On-Road Sedan. This shock tower fastens to the Rear Side Plates #4824 (TRAC4824). and supports the top section of each shock.

FEATURES: Replaces damaged shock towers.
Constructed of hardened plastic.
Two mounting holes per side for different damping rates.

INCLUDES: One Rear Shock Tower for the Traxxas Nitro and Electric 4-Tec Four Wheel Drive On-Road Sedan.

REQUIRES: Fastening to side plates with four 3mm x10mm countersunk machine screws. Attaching top section of shocks with 3mm x 20mm countersunk machine screws.

SPECS: Width: 3.36" (85mm)
Height: 1.96" (50mm)
Thickness: 0.24" (6mm)

Quantity   
tra4335.jpg
Traxxas Front Bumper 4-Tec
$5.00
TRA4335

This is the Direct Replacement Front Bumper for the Electric Traxxas 4-Tec.

FEATURES: Nylon Construction
Black in Color

INCLUDES: One Nylon Black Front Bumper

Quantity   
tra4336.jpg
Traxxas Steering Blocks 4-Tec (2)
$4.00
TRA4336

This is a pair of the Steering Blocks for the Traxxas Nitro and Electric Powered 4-Tec Touring Cars. These Blocks support the Wheel Hubs and connect to the Front Suspension Arms and Steering Tie Rods.

FEATURES: Constructed of high impact plastic
Replaces worn or damaged Steering Blocks

INCLUDES: Two Steering Blocks for the Traxxas Nitro and Electric Powered 4-Tec Touring Cars with four metal inserts. All are Key #4336

REQUIRES: Inserting two 5mm x 10mm ball bearings (can use DTXC1547), fastening to Front Suspension Arms (TRAC4831), and Tie Rods (TRAC4841).

COMMENTS: For the optional aluminum version, order TRAC8136.

Quantity   
tra4336.jpg
Traxxas Steering Blocks 4-Tec (2)
$4.00
TRA4336

This is a pair of the Steering Blocks for the Traxxas Nitro and Electric Powered 4-Tec Touring Cars. These Blocks support the Wheel Hubs and connect to the Front Suspension Arms and Steering Tie Rods.

FEATURES: Constructed of high impact plastic
Replaces worn or damaged Steering Blocks

INCLUDES: Two Steering Blocks for the Traxxas Nitro and Electric Powered 4-Tec Touring Cars with four metal inserts.
All are Key #4336

REQUIRES: Inserting two 5mm x 10mm ball bearings (can use DTXC1547), fastening to Front Suspension Arms (TRAC4831), and Tie Rods (TRAC4841).

COMMENTS: For the optional aluminum version, order TRAC8136

Quantity   
tra4352.jpg
Traxxas Rear Hub Carriers 1.5 Degree 4-Tec
$3.00
TRA4352

These are the stock replacement stub axle carriers for the Traxxas Electric and Nitro 4-TEC touring cars.

FEATURES: Black nylon construction

INCLUDES: Two Axle Carriers

REQUIRES: Assembly into Traxxas 4-TEC (Nitro or Electric)

SPECS: Suspension arm mount width: 14.4mm (.57")
Bearing size hole: 11mm
Height: 42mm (1.65")
Toe in angle: 1.5

COMMENTS: To prevent confusion, the axle carriers are stamped L and R. The rear axles ride in these.

Quantity   
tra4365.jpg
Traxxas Shock Spacers 4-Tec (6)
$2.50
TRA4365

This is a set of Stock replacement Shock Spacers for the Traxxas 4-Tec. These mount at the top of the shocks.

FEATURES: Black plastic construction

INCLUDES: Six Spacers

REQUIRES: Nothing. This is a direct replacement part.

SPECS: Length: 12.2mm (.48")
Larger outer diameter: 6.3mm (.25")
Smaller outer diameter: 4.8mm (.19")

COMMENTS: This package contains six spacers, however the 4-Tec only uses four.

Quantity   
tra4420.jpg
Traxxas Ball Differential Pro Style Rustler
$60.00
TRA4428

This is a Pro Ball Differential for the Nitro Stampede, Nitro Rustler and Nitro Sport.

FEATURES: Steel Ball Diff.

INCLUDES: One Diff Ball Grease Tube
One Thrust Bearing Grease Tube
One Right Output Shaft
One Left Output Shaft
Two 25 mm Diff Rings
One Thrust Washer Retainer
Two 5x8 mm Bearings
One Main Diff Shaft
Four Belleville Spring Washers
Twelve 3/32 Diff Balls
One Main Diff Gear (45 Teeth)
Three 2x4 mm Cap Screws
Six 2 mm Split Washers
One 2.6x10 mm Self Tap Round Head Screw
One Thrust Washer
One 2.6x8 mm Flat Head Screw

REQUIRES: Nitro Rustler, Nitro Sport, Nitro Stampede

Quantity   
tra4434.jpg
Traxxas Gearbox Brace Rustler
$3.00
TRA4434

This is a Gearbox Brace for the Nitro Rustler and the Nitro Sport.

FEATURES: Black Plastic Construction

INCLUDES: One Brace

REQUIRES: Traxxas Nitro Rustler or Nitro Sport

Quantity   
tra4439.jpg
Traxxas Shock Tower Front Rustler
$4.00
TRA4439

This is the front shock tower for the Traxxas Nitro Rustler.

Inlcudes: One shock tower

Features: Molded nylon construction

Specs: 83mm wide
72mm tall
7mm thick

Requires: Nothing, this is a stock replacement part.

tra4448.jpg
Traxxas Fuel Tank Nitro Rustler
$12.00
TRA4448

This is a replacement fuel tank for the Traxxas Nitro Rustler Stadium truck kit

Features:
Clear plastic, flip-top style tank for glow fuel only.
Nipples for fuel outlet and muffler pressurisation are conveniently located on the top of the tank
Muffler pressurisation nipple is fitted with a check ball to prevent back-flow and keep the tank pressurised when the engine is running at low speed

Includes: (1) fuel tank and (2) foam cushions which isolate the tank from vibration

Dimensions: Length: a) including flange - 80mm b) no flange - 72mm
Width: a) with flange - 50mm b) no flange - 40mm
Height: a) tank only - 30mm b) tank plus filler cap - 60mm
Volume (approx): 88cc

Quantity   
tra4449.jpg
Traxxas Fuel Tank Rebuild Kit Rustler
$4.00
TRA4449

This is the Fuel Tank Rebuild Kit for the Traxxas Rustler.

FEATURES: Direct fit replacement parts

INCLUDES: One tank cap
One tank seal
One tank cap spring
One small screw to attach seal to cap
One large screw to attach cap to tank

REQUIRES: Installing on the tank

Quantity   
tra4451.jpg
Traxxas Rubber Pipe Exhaust Rustler
$4.50
TRA4451

This is the rubber exhaust pipe for the Traxxas Nitro Rustler.

Includes: One rubber pipe.

Features: Durable black rubber construction.

Specs: 85mm long=3 5/16"
16mm outer diameter=11/16"
13mm inner diameter=1/2"

Quantity   
tra4460.jpg
Traxxas Engine Mounting Set Rustler
$12.00
TRA4460

This is the Traxxas (TRA) #4460 Aluminum Engine Mounting Set for the Nitro Rustler

FEATURES: Aluminum construction
Hex drives and phillips drive

INCLUDES: One engine mount
Two upper plates Hardware

SPECS: Length of engine mount 64mm (2.51") and Width: 65mm (2.56")
Length of left mounting plate 52mm (2.06") and Width: 23mm (.90")
Length of right mounting plate 40mm (1.58") and Width: 25mm (.99")

COMMENTS: This set has all of hardware to assemble the engine to the mounts and chassis.

Quantity   
tra4470.jpg
Traxxas Spur Gear 32P 70T Rustler
$3.00
TRA4470

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Features: Tough nylon construction
Drilled for light weight
Specs: Teeth-70
Pitch-32

Requires: Nothing, this is a direct replacement part.

Comments: This is the same gear that comes in the truck kit.

Quantity   
tra4472.jpg
Traxxas Spur Gear 32P 72T Rustler
$3.00
TRA4472

This is the Replacement 72 Spur Gear for the Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES: Black plastic, slipper clutch style spur gear.

INCLUDES: One 72 tooth spur gear

REQUIRES: The other parts of that make up the slipper clutch are:
#1994 - tension spring TRAC7994
#4625 - pressure plate TRAC9625
#4622 - pressure rings TRAC9622
#4685 - friction pegs TRAC9685
#4185 - top gear shaft to slipper adapter TRAC4185

SPECS: Tooth: 72
Pitch: 32

Quantity   
tra4472r.jpg
Traxxas Spur Gear 72T
$3.00
TRA4472R

This is the Traxxas 72T Spur Gear for the Nitro Rustler.

FEATURES: Made of black nylon
Uses friction pegs

INCLUDES: Traxxas 72T Spur Gear for the Nitro Rustler

SPECS: 72 tooth

Quantity   
tra4485.jpg
Traxxas Aluminum Tuned Pipe/Header Set Blue
$60.00
TRA4485

This is an Aluminum Tuned Pipe and Header Assembly. For any car with a side exhaust and sideways mounted .12-.15 size engine.

FEATURES: Blue anodized aluminum manifold, tuned pipe and pressure fitting. Header wraps around the back of the engine, angling downward at 30 degrees, and levels off straight. This would point the tuned pipe toward the front of the model. Allows the engine to have strong power across mid & upper RPM range. Will wrap around most pull starter assemblies.

INCUUDES: One Header (manifold)
One Tuned Pipe w/ 90 degree pressure fitting installed
One White Silicone Coupler
Two Black Tie Straps (for the coupler)
One piece of blue standard size Fuel Tubing (for fuel tank pressure)
One Exhaust Gasket
Two 3 x 23mm cap head Screws (for mounting header to engine)
Two 3mm lock Washers (for mounting header to engine)
One 3" Mounting Wire (for securing pipe to the chassis) _
One 4 x 4mm Set Screw (for securing wire to the pipe)
One 3 x 10mm flat head Screw (for securing pipe to the chassis)
One 3mm nylon Nut (for securing pipe to the chassis)

REQUIRES: Assembling onto a .12 to .15 size engine and chassis.
2mm and 2.5mm hex driver and 5.5mm nut driver.

SPECS: Pipe Length: 114.6mm
Diameter: 32.1mm
Header mounting holes on center: 27.5mm

Quantity   
tra4491.jpg
Traxxas Gearbox Halves Rustler
$5.00
TRA4491

This set contains the stock replacement gearbox halves for the Traxxas Nitro Rustler (not the electric Rustler - use TRAC9091). The gear box contains the differential gear and all other gears except the spur gear.

Features: Sturdy black plastic construction

Includes: (1) Left and (1) right gearbox half
Assembly screws are not included but the two halves are held together by
(2) M3X25 - DTXC8644
(2) M3X25 - TRAC4866
(1) M3X15 - TRAC4863

Quantity   
tra4575.jpg
Traxxas EZ-Start Gearbox
$6.00
TRA4575

This is the stock replacement EZ start gearbox for Traxxas vehicles. This is used on vehicles that have the EZ starting system.

FEATURES: Durable nylon construction

INCLUDES: One front half of gearbox
One rear half of gearbox
Seven mounting screws

REQUIRES: The remainder of the EZ Start System

Quantity   
tra4576.jpg
Traxxas EZ-Start Gear Set/Shafts
$6.00
TRA4576

These are Replacement Gears and Shafts for the Traxxas EZ-Start System.

FEATURES: Steel main gear
Nylon and nylon/metal gears
Metal gear shafts

INCLUDES: One 29T Steel Main Gear
One 18T x 10T Nylon/Metal Gear
One 37T x 11T Nylon Gear
Two 3 x 14mm Metal Shafts
One 3 x 5mm Brass Bushing

REQUIRES: Traxxas vehicle with EZ-Start system.

COMMENTS: Most GP models made by Traxxas have the EZ-Start system.

Quantity   
tra4579.jpg
Traxxas EZ-Start Quick Connector
$5.00
TRA4579

This is the stock replacement Quick Connector set for the Traxxas EZ Start.

FEATURES: All wires included in an EZ starting system

INCLUDES: One complete Wire Set with connectors
Two zip ties
REQUIRES: The remainder of the EZ Starting system.

COMMENTS: This does not include the connector and box which attaches to the 7.2V battery pack for use on the EZ starting system. (TRAP4580)

Quantity   
tra4579x.jpg
Traxxas Connector Wiring Harness 4570/5270 Revo
$5.00
TRA4579X

This is the Updated Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into.

FEATURES: Extra long 12" wires
Pre-installed connectors and eyelets

INCLUDES: One wire harness
One black connector bracket

REQUIRES: Installation onto vehicle equipped with EZ Start or EZ Start 2.

COMMENTS: The differences between this and the old design are: Longer wire leads, L-shaped motor connectors, and one continuous glow plug wire.

Quantity   
tra4581.jpg
Traxxas Glow Plug Lead Wire Blue T-Maxx
$1.75
TRA4581

This is the Glow Plug Lead Wire for the T-Maxx Truck Kit. This wire that is attached to the glow plug that heats it while starting.

FEATURES: This is a blue silicone wire. It has one bullet connector soldered on one end of wire.

INCLUDES: One blue glow plug lead wire with bullet connector.

COMMENTS: Designed for use only with the EZ Start System

Quantity   
tra4583.jpg
Traxxas EZ Start Wiring Harness Jato
$5.00
TRA4583

This is the EZ Start Wire Harness for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Pre-Assembled Harness

INCLUDES: One Harness w/Motor + and -, Ground Wire, Glow Plug Wire

Quantity   
tra4611.jpg
Traxxas Ball Bearings 5x11x4mm (2)
$6.00
TRA4611

These are 5 x 11 x 4mm Ball Bearings from Traxxas.

FEATURES: Ball bearings reduce friction and last longer than bushings.
Chrome steel construction.
Used to upgrade from bushings.

INCLUDES: Two 5 x 11mm bearings

SPECS: Inner Diameter: 5mm
Outer Diameter: 11mm
Thickness: 4mm COMMENTS: To clean bearings use DTXC2458 Power Shot Cleaner
Quantity   
tra4612.jpg
Traxxas Ball Bearings 10x15x4mm (2)
$8.00
TRA4612

This is a Pair of Ball Bearings by Traxxas. Ball Bearings help to Reduce Friction on your Vehicle.

FEATURES: Stainless Steel Construction
Silver in Color

INCLUDES: Two Bearings

REQUIRES: Installation

SPECS: 10x15x4mm

COMMENTS: The Factory Number is 4612. Per Package.

Quantity   
tra4614.jpg
Traxxas Bearings 6x12x4mm T-Maxx (2)
$6.00
TRA4614

This is the Replacement Set of 6x12x4mm Ball Bearings for the Traxxas T-Maxx 4WD Radio Control Monster Truck. These bearings are installed in the axle carriers and the differential housings of the T-Maxx.

FEATURES: Replaces worn bearings
Constructed of steel

INCLUDES: Two 6x12x4mm Ball Bearings for the Traxxas T-Maxx Monster Truck

REQUIRES: Installing two bearings in each axle carrier (4932) and two for each front and rear differential housings (4980)

Quantity   
TRA4622.jpg
Traxxas Notched Slipper/Differential Ring
$2.50
TRA4622

These are the replacement slipper and differential rings for the Traxxas kits that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue Eagles). They are metal rings with a notch in them and are installed on either side the differential gear or the spur gear.

PACKAGE INCLUDES: Two notched rings

Quantity   
tra4625.jpg
Traxxas Slipper Press Plate/Differential
$5.00
TRA4625

This is a replacement parts set for the Traxxas Rad2, Hawk2, Nitro Hawk, Nitro Street, TRX-T Eagle, Blue Eagle, and Blue Eagle LSII.

This Package Includes:
(1) Slipper (or differential) pressure plate

Quantity   
tra4628r.jpg
Traxxas Differential Output Yokes Black (2)
$4.00
TRA4628R

These are the Differential Output Yokes for the Traxxas Bandit, Stampede and Rustler VXL.

FEATURES: Black plastic construction

INCLUDES: Two differntial output yokes
Two 3x5mm countersunk screws
Two screw pins

REQUIRES: Installation

SPECS: Length: .70" (18mm)
Diameter: .51" (13mm)

Quantity   
tra4676.jpg
Traxxas Spur Gear 48P 76T
$3.00
TRA4676

This is a 48P, 76T Spur Gear for models with Traxxas Torque Control Slipper Clutch.

FEATURES: 48 pitch
76 tooth
Designed for models with a slipper clutch.
Black plastic construction

INCLUDES: One spur gear

SPECS: Pitch: 48
Tooth: 76

COMMENTS: For this slipper clutch design there is also a 86T gear (TRAC4686), 83T gear (TRAC4683) and 90T gear (TRAC4690).

Quantity   
tra4681.jpg
Traxxas Spur Gear 48P 81T
$3.00
TRA4681

This is a a 48 pitch nylon spur gear used on the Traxxas Pro-Series transmission, such as the tranny used in the TRX-1.

Features: Spur is made of Nylon.
12 Diff Ball holes. (Can accomodate upto 12 diff balls for high pressure diff settings)
Wide profile, to handle high torque conditions
Includes white plastic adapter.
Specification: 81 tooth
48 pitch

Includes: (1) spur
(1) adapter

Quantity   
tra4683.jpg
Traxxas Spur Gear 48P 83T
$3.00
TRA4683

This is a 48P, 83T Spur Gear for models with Traxxas Torque Control Slipper Clutch.

FEATURES: 48 pitch
83 tooth
Designed for models with a slipper clutch.
Black plastic construction

INCLUDES: One spur gear

SPECS: Pitch: 48
Tooth: 83

COMMENTS: For this slipper clutch design there is also a 76T gear (TRAC4676), 86T gear (TRAC4686) and 90T gear (TRAC4690).

Quantity   
tra4685.jpg
Traxxas Slipper Friction Pegs (12)
$4.50
TRA4685

These are replacement slipper friction pegs for all of the TRAXXAS kits that have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...

FEATURES: Made of RULON

INCLUDES: Twelve pegs

SPECS: length - 3.5mm
diameter - 3mm

COMMENTS: These pegs go in the holes on the side of the spur gear.

TRA4686.jpg
Traxxas Spur Gear 48P 86T
$3.00
TRA4686

This is a Traxxas 48P, 86T Spur Gear for models with Torque Control Slipper Clutch.

FEATURES: 48 pitch
86 tooth
Designed for models with a slipper clutch.
Black plastic construction

INCLUDES: One spur gear

SPECS: Pitch: 48
Tooth: 86

COMMENTS: For this slipper clutch design there is also a 76T gear (TRAC4676), 83T gear (TRAC4683) and 90T gear (TRAC4690).

Quantity   
TRA4687.jpg
Traxxas Spur Gear 48P 87T
$3.00
TRA4687

This is a a 48 pitch nylon spur gear used on the Traxxas Pro-Series transmission, such as the tranny used in the TRX-1.

Features: Spur is made of nylon.
12 diff ball holes. (Can accomodate upto 12 diff balls for high pressure diff settings)
Wide profile, to handle high torque conditions
Includes white plastic adapter.

Specification: 87 tooth
48 pitch

Includes: (1) spur
(1) adapter

Quantity   
TRA4690.jpg
Traxxas Spur Gear 48P 90T
$3.00
TRA4690

This is a Traxxas 48P, 90T Spur Gear for models with Torque Control Slipper Clutch.

FEATURES: 48 pitch
90 tooth
Designed for models with a slipper clutch
Black plastic construction

INCLUDES: One spur gear

SPECS: Pitch: 48
Tooth: 90

COMMENTS: For this slipper clutch design there is also a 76T gear (TRAC4676), 83T gear (TRAC4683) and 86T gear (TRAC4686).

Quantity   
TRA4728.jpg
Traxxas Pinion Gear 48P 28T 4-Tec
$3.00
TRA4728

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FEATURES: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD remote control sedan.
Metal construction

INCLUDES: One Pinion Gear
One Set Screw

SPECS: Teeth: 28
Pitch: 48

Quantity   
TRA4831.jpg
Traxxas Front Suspension Arms (2)
$6.00
TRA4831

These are the Replacement Front Suspension Arms for Nitro 4-Tec. These are located on the front bulkhead and are held on by suspension pins.

FEATURES: Nylon construction
Black in color

INCLUDES: Two black nylon suspension arms

REQUIRES: Assembly onto kit.

SPECS: Length: 3"
Width: 1.2"

COMMENTS: This will work on the Nitro 4-Tec

Quantity   
TRA4832.jpg
Traxxas Fiberglass Tie Bar
$4.00
TRA4832

This is the Stock Fiberglass Tie Bar for the Nitro 4-Tec.

FEATURES: Fiberglass construction, natural color

INCLUDES: One tie bar

SPECS: Thickness: .10"
Width: 1-7/8"
Height: 15/16"

Quantity   
TRA4850.jpg
Traxxas Rear Suspension Arms Left/Right (2)
$5.00
TRA4850

This is the left and right Rear Suspension arms for the Traxxas Nitro 4Tec. This is a direct replacement part.

FEATURES: Black plastic construstion.

INCLUDES: Two suspension arms.

REQUIRES: Assembly onto vehicle.

SPECS: Length: 62.0mm (2.443")
Width: 37.7mm (1.486")
Thickness: 6.1mm (.243")

Quantity   
TRA4859.jpg
Traxxas Flat Head Hex Engine Mount Screws 3x10mm (4)
$1.75
TRA4859

These are Flat Head Engine Mount Screws from Traxxas.

FEATURES: Black steel construction.
Flat head with a hexagon socket drive insert.
Machine threaded.

INCLUDES: (4) Screws

REQUIRES: Threading through engine mount and tightening with 2.5mm wrench (can use GPMR8012)

SPECS: Size: 3x10mm

Quantity   
TRA4860.jpg
Traxxas Engine Mount/Screws
$8.00
TRA4860

This is the Stock Replacement Engine Mount for the Traxxas Nitro 4-Tec. This is what holds the engine to the chassis.

FEATURES: Aluminum construction (cast)

INCLUDES: One engine mount
Four 3mm caphead mount screws
Four 3mm washers
Four 3mm lock washers
Two 3x28mm flathead self tapping screws
Two 3x10mm buttonhead machine screws
REQUIRES: Installation onto Nitro 4-Tec.

SPECS: Engine mount length: 66mm (2.61")

Quantity   
TRA4884.jpg
Traxxas Spur Gear 41T Standard
$4.00
TRA4884

This is the Replacement 41 Tooth 1st Speed Spur Gear for the Nitro 4-TEC. This spur gear is installed in the transmission and meshes with the 2-speed drive gear.

FEATURES: Replaces damaged or worn spur gears
Black plastic construction

INCLUDES: One 41 Tooth 1st Speed Spur Gear

REQUIRES: Installing in gearbox between the drive hub assembly and the primary gears

Quantity   
TRA4885.jpg
Traxxas Spur Gear 41T Standard
$4.00
TRA4885

This is the Replacement 41 Tooth 1st Speed Spur Gear for the Nitro 4-TEC. This spur gear is installed in the transmission and meshes with the 2-speed drive gear.

FEATURES: Replaces damaged or worn spur gears
Black plastic construction

INCLUDES: One 41 Tooth 1st Speed Spur Gear

REQUIRES: Installing in gearbox between the drive hub assembly and the primary gears

Quantity   
TRA4886.jpg
Traxxas Spur Gear 37T Standard
$4.00
TRA4886

This is the 2nd Gear for the 2-speed for the Nitro 4-Tec.

FEATURES: Black nylon color

INCLUDES: One gear 37 Teeth

REQUIRES: Installing onto vehicle

Quantity   
TRA4894.jpg
Traxxas Front Pulley Shaft
$4.50
TRA4894

This is the Front Pulley Shaft for the Traxxas Nitro 4-Tec.

FEATURES: Steel shaft

INCLUDES: One steel shaft

REQUIRES: Assembly onto Nitro 4-Tec.

SPECS: Length: 2.9" (75mm)
Diameter: 0.20" (5mm)

COMMENTS: Will work only on the Traxxas Nitro 4-Tec.

Quantity   
TRA4914R.jpg
Traxxas Front Body Mount Posts T-Maxx 3.3
$6.00
TRA4914R

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins for the Traxxas T-Maxx 3.3R.

FEATURES: Constructed of plastic these posts and mount attach the body to the chassis

INCLUDES: Two Front Body Mount Posts Rear Body Mount and four 2.5 x 17mm screw pins

REQUIRES: Installing on chassis

Quantity   
TRA4915.jpg
Traxxas Foam Body Washers T-Maxx (10)
$2.00
TRA4915

These are Foam Body Washers for the Traxxas T-Maxx 4WD Radio Control Monster Truck. These body washers adhere to the inside of the body over the body mount holes and cushions the body from vibration.

FEATURES: Replaces damaged or missing body washers. Adhesive on one side allows easy attachment to body. Made of shock absorbing foam that helps to prevent splitting of body at mounting holes.

INCLUDES: Ten foam body washers for the Traxxas T-Maxx.

REQUIRES: Peeling off paper backing and attaching at mounting holes on body.

SPECS: Outer Diameter: 5/8" (16mm)
Inner Diameter: 1/4" (7mm)

COMMENTS: May be used on any lexan car body.

Quantity   
tra4917r.jpg
Traxxas Shock Tower Rectangular Body Posts
$5.00
TRA4917R

This is the Shock Tower for the all versions of the Traxxas T-Maxx. This is for rectangular body posts.

FEATURES: Plastic construction

INCLUDES: (1) Shock Tower

REQUIRES: Installation

SPECS: Width: 4.15" (105.5mm)
Height: 2.3" (58.5mm)
Thickness: 0.323" (8.2mm)
Quantity   
tra4919.jpg
Traxxas Brake/Throttle Servo Mounts T-Maxx
$3.50
TRA4919

This is a Pair of Throttle and Brake Servo Mounts for the Traxxas T-Maxx 4WD Radio Control Monster Truck. These mounts hold the throttle servo in place on the chassis and work for both the old and new versions of the T-Maxx.

FEATURES: Replaces damaged throttle and brake servo mounts. Constructed of black plastic.

INCLUDES: Two throttle and brake servo mounts for the Traxxas T-Maxx.

REQUIRES: Securing mounts to chassis with four 3x10mm round head machine screws and attaching servo to mounts with four 3x10mm washer head machine screws-(screws not included).

Quantity   
tra4923.jpg
Traxxas Chassis Braces Lower T-Maxx (2)
$8.00
TRA4923

This is a Pair of Chassis Braces for the Traxxas T-Maxx 4WD Radio Control Monster Truck. These chassis braces connect the chassis to the front and rear skidplates.

FEATURES: Replaces damaged chassis braces.
Constructed of black plastic.

INCLUDES: Two lower chassis braces for the Traxxas T-Maxx.

REQUIRES: Fastening to chassis with eight 3x12mm round head machine screws. and fastening to front (4937) and rear (4938) skidplates with eight 3x10mm countersunk machine screws (screws not included).

Quantity   
tra4925.jpg
Traxxas Battery Box T-Maxx
$4.75
TRA4925

This is the Battery Box for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This battery box mounts to the chassis and protects the battery pack from dirt and moisture. Fits both old and new versions of the T-Maxx.

FEATURES: Replaces damaged battery boxes.
Constructed of black plastic.

INCLUDES: One top and bottom half battery box for the Traxxas T-Maxx.

REQUIRES: Installing battery pack and attaching to chassis with two 3x10mm countersunk machine screws (not included).

Quantity   
tra4927x.jpg
Traxxas Transmission Output Yokes T-Maxx 2.5 (2)
$6.00
TRA4927X

These are the Optional Transmission Output Yokes for Traxxas vehicles.

FEATURES: Features strengthened plastic for long life and durability. These diff yokes are more rigid than the stock yokes. Black in color.

INCLUDES: Two heavy duty diff yokes
Two diff yoke mounting shafts

REQUIRES: Assembly onto the vehicle.

Quantity   
tra4928x.jpg
Traxxas Diff Output Yokes w/Screw Yoke Pins 2.5 (2)
$5.00
TRA4928X

These are the optional Differential Output Yokes for the T-Maxx and E-Maxx and the newer 2.5 T-Maxx from Traxxas.

FEATURES: Features thicker plastic for long life and durability. These diff yokes are more rigid than the stock yokes. Black in color.

INCLUDES: Two heavy duty diff yokes
Two yoke mounting shafts

REQUIRES: Assembly onto the truck.

Quantity   
tra4929r.jpg
Traxxas Rear Left/Right Bulkhead Gray T-Maxx (2)
$8.00
TRA4929R

This is the Left and Right Rear Bulkheads for the T-Maxx 3.3.

FEATURES: Fastens to rear skidplate and holds rear diff in place Constructed of hardened plastic

INCLUDES: Left and Right Rear Bulkheads for the T-Maxx 3.3

REQUIRES: Fastening to skidplate and differential

COMMENTS: For the 3.3 version only.

Quantity   
tra4930r.jpg
Traxxas Front Left/Right Bulkhead Gray T-Maxx (2)
$8.00
TRA4930R

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FEATURES: Fastens to front skidplate and holds front diff in place Gray in color, constructed of hardened plastic

INCLUDES: Left and Right Front Bulkheads for the T-Maxx 3.3

REQUIRES: Fastening to skidplate and differential

COMMENTS: For the 3.3 version only.

Quantity   
tra4931.jpg
Traxxas Suspension Arms Upper/Lower T-Maxx (2)
$7.00
TRA4931

This is a Molded Upper and Lower A-Arm Set for the Traxxas T-Maxx & E-Maxx. These go between the bulkheads and the axle carriers and the bottom of the shocks attach to these. **This A-Arm Set fits only the older versions of these kits.**

FEATURES: Molded of black nylon
Replacement part

INCLUDES: One upper A-arm
One lower A-arm

REQUIRES: Assembly onto the kit.

SPECS: Length- Upper: 4.76" (120.6mm)
Lower: 4.31" (109.3mm)
Width- Upper: 1.89" (48.1mm)
Lower: 3.09" (78.5mm)

COMMENTS: This set will not fit the newer T-Maxx's.

Quantity   
tra4932.jpg
Traxxas Axle Carriers/Steering Blocks T-Maxx
$6.00
TRA4932

This is the set of Axle Carriers and Steering Blocks for the Traxxas T-Maxx 4WD Radio Control Monster Truck. The axle carriers and steering blocks support the stub axles and bolt to the upper and lower suspension arms at each wheel.

FEATURES: Replaces damaged axle carriers and steering blocks.
Constructed of black plastic.

INCLUDES: One set of axle carriers and steering blocks for the Traxxas T-Maxx.

REQUIRES: Bolting to each suspension arm (4931), installing two 6x12mm ball bearings (4614) and installing the stub axles (4953)

COMMENTS: Manufacturer's website is www.traxxas.com

Quantity   
Traxxas Pivot Balls Anodized Aluminum T-Maxx (4)
$20.00
TRA4933X

These are the Optional Pivot Balls for the Traxxas T-Maxx 4WD Radio Control Monster Truck. These pivot balls are installed through the upper and lower suspension arms and axle carriers and allow camber adjustment of the wheels. FEATURES: Replace stock pivot balls with these hardened heavy duty versions.
Constructed of 7075 T-6 aluminum.

INCLUDES: Four hard anodized 7075 T-6 aluminum pivot balls.
Four ball cap bushings.

REQUIRES: Installing through the suspension arms (4931) and axle carriers (4932).

Quantity   
tra4935.jpg
Traxxas Bumpers Front & Rear T-Maxx
$6.00
TRA4935

These are the Front and Rear Bumpers for the Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks. These bumpers attach to the bumper mounts at the front & rear of the chassis.

FEATURES: Replaces stock plastic bumpers.
Constructed of molded silver colored plastic.

INCLUDES: One dual-tube front bumper
One dual-tube rear bumper

REQUIRES: Fastening each bumper to the bumper mounts (4936) with four 3x12mm buttonhead cap screws (not included).

Quantity   
TRA4937A.jpg
Traxxas Skid Plate Front Plastic Gray
$6.00
TRA4937A

This is the Front Plastic Skidplate for the T-Maxx 3.3.

FEATURES: Attaches to and protects chassis and supports the front bulkhead Skidplate is gray in color

INCLUDES: Skidplate and stainless steel plate
REQUIRES: Installing on chassis with four 3x12mm countersunk machine screws (not included, use TRAC2552

COMMENTS: For the 3.3 version only. For the original T-Maxx Skidplate, order TRAC4037.

Quantity   
TRA4938.jpg
Traxxas Skid Plate Rear Plastic T-Maxx
$6.00
TRA4938

This is the Replacement Rear Skidplate for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This rear skidplate bolts underneath the chassis and helps to prevent the chassis from getting scratched.

FEATURES: Replaces damaged rear skidplates.
Constructed of black plastic.

INCLUDES: One rear skidplate.

REQUIRES: Bolting to bottom of chassis using three 3x10mm countersunk machine screws (not included).

Quantity   
TRA4939.jpg
Traxxas Suspension Screw Pin Set T-Maxx (8)
$6.00
TRA4939

These are the replacement hinge pin screws for the Traxxas T/E-Maxx The hinge pins hold the suspension arms to the bulkheads.

FEATURES: Durable steel construction

INCLUDES: Eight pins

REQUIRES: Assembly onto T/E-Maxx

SPECS: Length: 65.3mm (2.57")
Diameter: 3.2mm (.13")

COMMENTS: These are enough hinge pins for the entire vehicle.

Quantity   
TRA4939X.jpg
Traxxas Stainless Steel Suspension Pin Set T-Maxx (8)
$12.00
TRA4939X

This is the Optional Stainless Steel Suspension Pin Set for the Traxxas T-Maxx or E-Maxx Monster Trucks. These suspension pins hold the upper and lower front and rear suspension arms to the bulkheads.

FEATURES: Stainless steel construction.

INCLUDES: Four 3x70.5mm pins for the upper front and rear suspension arms.
Two 3x63mm pins for the lower front suspension arms.
Two 3x57mm pins for lower rear suspension arms.
Eighteen e-clips

REQUIRES: Inserting each pin through the bulkheads and the suspension arms and securing with e-clips.

Quantity   
TRA4943.jpg
Traxxas Bellcrank/Parts T-Maxx
$5.00
TRA4943

This is a Pair of the Steering Bellcranks for the Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks. These bellcranks bolt to the chassis and the bellcrank posts connect to the steering turnbuckles.

FEATURES: Replaces stock steering bellcranks. All components are plastic, except for the shoulder screws which are steel.

INCLUDES: Two steering bellcranks
Four 5x8x2.5mm bellcrank bushings.
Two bellcrank post spacers.
Two 3x8mm shoulder screws.
One drag link.

REQUIRES: Attaching bellcranks to the chassis and attaching drag link to the steering turnbuckles.

Quantity   
TRA4944.jpg
Traxxas Bellcrank Posts Aluminum T-Maxx (2)
$7.00
TRA4944

This is a Pair of the Aluminum Bellcrank Posts for the Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks. These bellcrank posts hold the steering bellcranks to the chassis. The link connects the steering bellcrank to the servo saver.

FEATURES: Stock aluminum steering bellcranks. Steering link is steel and rods ends are plastic.

INCLUDES: Two bellcrank posts
One 3x25mm steering link threaded rod with rod ends

REQUIRES: Placing bellcranks on posts and attaching posts to chassis. Attaching steering link to bellcrank and servo saver.

Quantity   
tra4945.jpg
Traxxas Steering Bellcranks E-Maxx
$12.00
TRA4945

This is the replacement Steering Bellcrank Set for the Traxxas #3905 E-Maxx. This will also work as an upgrade for the Nitro Maxx Series and the #3906 E-Maxx.

FEATURES: Composite nylon construction, black in color
Replaces a worn or damaged bellcrank set

INCLUDES: One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring Cap
One Servo Saver Spring
Two 3x12mm Shoulder Screws (2.5mm hex size)
Six 3x15 Button Head Cap Screws (2mm hex size)
One Black Nylon Spacer
Two White Nylon Spacer

REQUIRES: Assembly and installation following the model manual (a installation sheet is included for T-Maxx and #3906 E-Maxx installations)

COMMENTS: If you are installing this bellcrank on any model other than the #3905 E-Maxx the following items will also need to be purchased in order to install this set - TRA5116, TRA2579 and TRA3642.

Quantity   
TRA4948.jpg
Traxxas Fuel Tank T-Maxx
$14.00
TRA4948

This is the updated stock replacement fuel tank for the Traxxas T-Maxx. The fuel tank holds the fuel and screws directly to the chassis. This tank has been updated and NO LONGER has a PRIMER BUTTON.

FEATURES: Clear, nylon construction
Black fuel tank cap (spring loaded)

INCLUDES: One fuel tank
One Pre-installed lid with spring
One Pre-installed pressure tap

REQUIRES: Assembly on to Traxxas T-Maxx

SPECS: Length: 68.4mm (2.70")
Width: 62.3mm (2.46")
Capacity: 125cc
Height (including chassis mounts, to top of lid): 84mm (3.30")
Center to Center Distance between mounting holes: 43.3mm/38.2mm

COMMENTS: This fuel tank is unique to the T-Maxx and is not known to fit any other vehicles. If a Rebuild Kit is needed for this tank, order TRA4959.

Quantity   
TRA4949X.jpg
Traxxas Half Shafts Short T-Maxx 2.5 (2)
$8.00
TRA4949X

These are Heavy-Duty Half Shafts (short) for the 2.5 T-Maxx from Traxxas. These come out of either side of the transmission.

FEATURES: Black nylon construction

INCLUDES: Two heavy-duty short half-shafts (external-splined)
Two heavy-duty short half-shafts (internal-splined)
Four metal U-joints

REQUIRES: Nothing, direct replacement part

COMMENTS: Will not fit original T-Maxx with .15 engine.

Quantity   
TRA4951X.jpg
Traxxas Half Shafts Long T-Maxx (2)
$8.00
TRA4951X

This is a pair of stock replacement long half shafts for the Traxxas T/E-Maxx These are the "swingshaft" or "dogbone" components of the T/E-Maxx.

FEATURES: Durable nylon construction
Steel u-joints

INCLUDES: Two long external splined half shafts
Two long internal splined half shafts
Four u-joint connectors

REQUIRES: Assembly into a T-Maxx or E-Maxx

SPECS: Length (of each component): 78mm (3.07")
Diameter of internal splined shaft: 12mm (.47")
Diameter of external splined shaft: 9.3mm (.36")
Diameter of u-joint connector spherical section: 9.2mm (.36")
Total length of u-joint connector pins: 16.1mm (.63")
Width between shaft u-joint connector mounts: 10.6mm (.42")

Quantity   
TRA4953X.jpg
Traxxas Stub Axle T-Maxx 2.5 (2)
$8.00
TRA4953X

These are the Stub Axles for the Traxxas 2.5 T-Maxx monster truck.

FEATURES: Features heavy duty nylon yokes for long lasting durability. The steel axle extends from the nylon yoke. Black in color.

INCLUDES: Two heavy duty stub axles

REQUIRES: Assembly onto the truck.

COMMENTS: The axle portion goes through the axle carrier for the wheel to attach to.

Quantity   
TRA4954.jpg
Traxxas Hex Wheel Hubs/Pins T-Maxx (2)
$2.50
TRA4954

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Monster Truck. These wheel hubs fit on the end of the stub axles.

FEATURES: Replaces missing or damaged hex wheel hubs
Hubs are made of molded black plastic
Axle pins are steel

INCLUDES: Two Hex Wheel Hubs
Two 2.5x12mm axle pins

REQUIRES: Inserting pins through stub axles (4953) and placing wheel hubs in recessed area of axle carriers (4932).

Quantity   
TRA4954X.jpg
Traxxas Hex Wheel Hub Aluminum T-Maxx (4)
$20.00
TRA4954X

These are Aluminum Hex Wheel Hubs for the T-Maxx and E-Maxx Truck Kits.

FEATURES: Blue anodized.
Machined 6061 T-6 aluminum construction.
Packaged in foam, on a bubble sealed header card.

INCLUDES: Four Hex Wheel Hubs
Four 2.5 x 10mm Axle Pins

REQUIRES: Assembly onto the truck.

SPECS: Width: 13.0mm
Inner Diameter: 6.3mm

Quantity   
TRA4955.jpg
Traxxas Axle Pins T-Maxx (4)
$1.00
TRA4955

This is the Set of Axle Pins for the Traxxas T-Maxx 4WD RTR Monster Truck. These pins go through the stub axles on each wheel, the wheel hubs are then placed over these pins.

FEATURES: Replaces missing axle pins
Axle pins are steel

INCLUDES: Four 2.5x12mm axle pins

REQUIRES: Inserting pins through stub axles (4953) and installing wheel hubs (4954) over pins.

Quantity   
TRA4958.jpg
Traxxas Fuel Tank Rebuild Kit
$5.00
TRA4958

This is the Fuel Tank Rebuild Kit for the Traxxas T-Maxx fuel tank - TRA4048.

FEATURES: Rebuild worn or damaged fuel tank parts

INCLUDES: One black nylon cap
One steel cap spring
One 14x25mm black foam washer
One upper black nylon, foam washer retainer
One lower black nylon, foam washer retainer
One 13x19mm orange o-ring
One 3x6mm hex head screw (requires a 2.5mm hex wrench)
One 2.5x29mm screw pin

REQUIRES: Assembly and installation onto the fuel tank

COMMENTS: For the complete fuel tank order TRA4048.

Quantity   
TRA4964.jpg
Traxxas Brake Disc T-Maxx
$2.75
TRA4964

This is the Brake Disc for the Traxxas T-Maxx 4WD RTR Monster Truck. This disc fits between the brake pads and fastens to the rear of the gearbox.

FEATURES: Replaces worn brake discs
Fiber faced for long life

INCLUDES: One Brake Disc

REQUIRES: Installing brake adapter (4966), pads (4965) and output yoke (4927) at rear of transmission.

Quantity   
tra4975.jpg
Traxxas Wheelie Bar Assembled T/E-Maxx
$20.00
TRA4975

This is an optional Wheelie Bar for all Traxxas Maxx series vehicles.

FEATURES: Constructed of hardened plastic, black in color Installs at rear of chassis to prevent vehicle from flipping over during wheelies

INCLUDES: Assembled optional Wheelie Bar for all Traxxas Maxx series vehicles

REQUIRES: Fastening to rear of chassis

Quantity   
tra4982.jpg
Traxxas Differential Gear Set T-Maxx
$9.00
TRA4982

This is the Stock Replacement Diff Gear Set for the Traxxas T/E Maxx. These gears can also be referred to as bevel gears.

FEATURES: Durable steel construction

INCLUDES: Two 13 Tooth Output Gear Shafts
Two 13 Tooth Spider Gears
One Spider Shaft
One 6x10x0.5mm washer

REQUIRES: Assembly into differential

COMMENTS: This set contains only enough diff gears for one differential.

Quantity   
tra4984.jpg
Traxxas Spur Gear 43T T-Maxx
$4.00
TRA4984

This is the Replacement 43 Tooth 1st Speed Spur Gear for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This spur gear is installed in the transmission and meshes with the 2-speed drive gear.

FEATURES: Replaces damaged or worn spur gears
Constructed of plastic

INCLUDES: One 43 Tooth 1st Speed Spur Gear for the Traxxas T-Maxx Truck

REQUIRES: Installing in gearbox between the drive hub assembly (4988) and the primary gears (4995)

Quantity   
tra4991.jpg
Traxxas Gearbox Halves Front & Rear T-Maxx
$10.00
TRA4991

These are the Replacement Gearbox Halves for the Traxxas T-Maxx 4WD Radio Control Monster Truck. These gearbox halves house the primary, spur, drive, output gear and clutch assemblies.

FEATURES: Replaces damaged gearbox halves
Constructed of plastic

INCLUDES: Two gearbox halves
One rubber access plug for transmission adjustment

REQUIRES: Placing of transmission components into gearbox halves and putting halves together with seven 3x10mm roundhead self-tapping screws- (not included)

Quantity   
tra4992.jpg
Traxxas Drive Gear 2-Speed T-Maxx
$6.00
TRA4992

his is the Replacement 2-Speed Drive Gear with Slipper Shaft for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This 2-speed drive gear is installed in the gearbox and meshes with the 1st speed spur gear (4984) and the 2nd speed spur gear (4985).

FEATURES: Replaces damaged or worn 2-speed drive gears. Gears are constructed of plastic and pre-installed on steel shaft.

INCLUDES: One 17 and 22 tooth drive gear for the Traxxas T-Maxx
One slipper shaft
One C-clip

REQUIRES: Opening gearbox and installing 2-speed drive gear assembly on spur gears.

Quantity   
tra4993.jpg
Traxxas Gear Shaft Primary T-Maxx
$3.00
TRA4993

This is the Primary Gear Shaft for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This shaft installs between the spur gear and the primary gears in the gearbox.

FEATURES: Replaces stock gear shaft.
Constructed of steel.

INCLUDES: One gear shaft

REQUIRES: Diassembly of gearbox and installing shaft between the spur gear and the primary gears.

Quantity   
tra4995.jpg
Traxxas Primary Gears T-Maxx
$6.00
TRA4995

This is the Replacement Primary Gear Set for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This gear set is installed on the primary gear shaft in the transmission.

FEATURES: Replaces damaged or worn primary gears
Constructed of plastic

INCLUDES: One 28 tooth forward and one 22 tooth reverse gear
One 2x9.8mm steel drive pin
One 5x10x0.5mm washer

REQUIRES: Diassembly of gearbox and installing primary gears on to primary gear shaft (4993)

Quantity   
tra5116.jpg
Traxxas Ball Bearings 5x11x4mm Revo (2)
$3.50
TRA5116

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES: Metal bearing construction
Blue rubber dirt shields

INCLUDES: (2) 5X11mm ball bearings, Part #5116

SPECS: Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Quantity   
tra5117.jpg
Traxxas Ball Bearings 6x12x4mm Revo (2)
$4.00
TRA5117
BR>This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES: Steel construction Blue rubber dirt shields

INCLUDES: (2) ball bearings, Part #5117

PECS: Inside diameter: 6mm
Outside diameter: 12mm
Width: 4mm

COMMENTS: This bearing set is used in the transmission and differentials of the Revo.

Quantity   
tra5118.jpg
Traxxas Ball Bearings 8x16x5mm Revo (2)
$6.00
TRA5118

These are the replacement Differential Bearings for the Traxxas Nitro Revo Monster Truck.

FEATURES: Stainless Construction
Blue Rubber Sealed

INCLUDES: Two 8mm x 16mm Rubber Sealed Bearings

REQUIRES: Assembly onto Vehicle

SPECS: Inner Diameter: 8mm (0.31")
Outer Diameter: 16mm (0.62")
Thickness: 5mm (0.19")

Quantity   
tra5119.jpg
Traxxas Ball Bearings 10x15x4mm Revo (2)
$7.00
TRA5119

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES: Steel Construction
Shielded with blue rubber seals

INCLUDES: Two Ball Bearings

REQUIRES: Assembly to vehicle

SPECS: Inner Diameter: 10mm
Outer Diameter: 15mm
Side Thickness: 4mm

COMMENTS: These bearings are used to support the Primary Clutch (one needed).

Quantity   
TRA5131R.jpg
Traxxas Upper Suspension Arms T-Maxx 3.3 (2)
$7.50
TRA5131R

These are the Upper Suspension Arms for the T-Maxx 3.3.

FEATURES: Fastens to bulkhead and helps to support axle carriers
Black in color, constructed of hardened plastic

INCLUDES: One Right and one Left Upper Suspension Arm for the T-Maxx 3.3

REQUIRES: Fastening to chassis

COMMENTS: For the 3.3 version only.

Quantity   
TRA5132R.jpg
Traxxas Lower Suspension Arms T-Maxx 3.3 (2)
$7.50
TRA5132R

These are the Lower Suspension Arms for the T-Maxx 3.3.

FEATURES: Helps to support axle carriers and shocks
Black in color, constructed of hardened plastic

INCLUDES: One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

REQUIRES: Fastening to chassis

COMMENTS: For the 3.3 version only. For the original T-Maxx Lower Suspension Arms, order TRA5132.

Quantity   
TRA5134.jpg
Traxxas Caster Spacers w/Shims T-Maxx 2.5 (4)
$3.00
TRA5134

This is a Package of Replacement Caster Spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels.

FEATURES: Black nylon construction.

INCLUDES: Four caster spacers
Four caster shims

REQUIRES: Nothing. These are direct replacement parts.

SPECS: Thickness: 2mm (0.08")

Quantity   
tra5135.jpg
Traxxas Differential Oil 10K Weight Revo
$7.50
TRA5135

This is 10K wt Differential Oil for the Traxxas Revo but can be used in other vehicles as well.

FEATURES: 10K wt oil

INCLUDES: A 1.75 oz (50cc) bottle of oil w/ 1-1/2" pointed fill cap.

Quantity   
tra5136.jpg
Traxxas Differential Oil 30K Weight Revo
$7.50
TRA5136
BR>This is 30K wt Differential Oil for the Traxxas Revo but can be used in other vehicles as well.

FEATURES: 30K wt oil

INCLUDES: A 1.75 oz (50cc) bottle of oil w/ 1-1/2" pointed fill cap

Quantity   
tra5137.jpg
Traxxas Differential Oil 50K Weight Revo
$7.50
TRA5137

This is 50K wt Differential Oil for the Traxxas Revo but can be used in other vehicles as well.

FEATURES: 50K weight oil

INCLUDES: 1.75 oz (50cc) bottle of oil w/ 1-1/2" (38mm) pointed fill cap

Quantity   
TRA5141.jpg
Traxxas Turnbuckles/Toe Links Front (2)
$10.00
TRA5141

These are the Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx, TRA78**

FEATURES: Constructed of steel, polished natural finish

INCLUDES: Two Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx.

REQUIRES: Installing between wheel hubs and front bulkheads

SPECS: Length: 4.7" (120mm)
Diameter: 0.20" (5mm)

COMMENTS: Fits only the 3.3 version of the T-Maxx.

Quantity   
TRA5141R.jpg
Traxxas Lightweight Aluminum Turnbuckle Red T-Maxx (2)
$25.00
TRA5141R

These are the optional Tubes Lightweight Aluminum Turnbuckles for the Traxxas T-Maxx

FEATURES: 30% lighter than stock steel toe links
4 times stiffer and more than double the strength of aftermarket titanium
Unique hollow tube design using 7075-T6 aluminum anodized fire red in color

INCLUDES: Two Tubes Lightweight Aluminum Turnbuckles for the Traxxas T-Maxx with non-marring 7mm aluminum wrench, 4 front and rear rod ends

REQUIRES: Installing on T-maxx

SPECS: Length: 4.40" (112mm)
Diameter: 0.24" (6mm)

Quantity   
TRA5142.jpg
Traxxas Caphead Machine Screws 3x15mm T-Maxx 2.5 (6)
$2.75
TRA5142

This is a Package of 3x15mm Cap Head Machine Screws with Split Washers. These are used on the Traxxas 2.5 engine exhaust header.

FEATURES: Silver steel construction.

INCLUDES: Six 3x15mm cap head machine screws
Six 3mm split washers

REQUIRES: These could be used in many other applications requiring this size.

Quantity   
TRA5147X.jpg
Traxxas Nuts 5mm Flanged Nylon Locking E-Maxx
$3.50
TRA5147X

This is a package of 5mm Flanged Nylon Locking Nuts from Traxxas.

FEATURES: Constructed of steel with serrated flange area for sure grip
Nylon insert

INCLUDES: Eight 5mm Flanged Nylon Locking Nuts

REQUIRES: 8mm nut drivers

SPECS: Hex Size: 8mm
Inner Diameter: 5mm

Quantity   
TRA5150.jpg
Traxxas E-Clips 2mm Revo (24)
$1.50
TRA5150

This is a package of 24 2mm E-Clips from Traxxas.

FEATURES: Zinc colored
Steel construction

INCLUDES: (24) 2mm e-clips

SPECS Outside diameter: .163" (4mm)
Opening: .059" (2mm)

COMMENTS: Header card may say 1.5mm, but the opening was checked and is actually 2mm.

Quantity   
TRA5151.jpg
Traxxas Half Shafts Center
$8.00
TRA5151

This is the Center Halfshaft Set for the Traxxas T-Maxx 3.3 RTR.

FEATURES: Constructed of hardened composite material with steel U-joints
Center front and center rear driveshaft assemblies

INCLUDES: Two external splined halfshafts
Two internal splined halfshafts
Four metal U-joints

REQUIRES: Installing between transmission and differentials

SPECS: Rear Internal Splined Halfshaft Length: 1.6" (40.5mm)
Front Internal Splined Halfshaft Length: 2" (51mm)
Front and Rear External Splined Halfshaft Length: 1.57" (40mm)

COMMENTS: These halfshafts are specific to the 3.3 T-Maxx and will not fit in any other version.

Quantity   
TRA5151R.jpg
Traxxas Center Driveshafts E-Maxx (2)
$40.00
TRA5151R

This is a pair of optional Center Driveshafts for the Traxxas E-Maxx.

FEATURES: Outside U-joint is lubricated and sealed by a rubber boot to protect it from dirt and grime U-joint pins are held captive by the ball bearings so you never have to worry about losing a pin Traxxas metal CV shafts do not require you to limit your suspension travel

INCLUDES: Two driveshafts with protective CV boots

REQUIRES: Traxxas E-Maxx

Quantity   
TRA5159.jpg
Traxxas Box Receiver/Clip/Foam Pad
$7.00
TRA5159

This is the Receiver Box for the T-Maxx 3.3.

FEATURES: Holds receiver and Optidrive Shift Module in place
Two piece, gray in color, constructed of hardened plastic

INCLUDES: Receiver Box and Body Clip, TRA3935

REQUIRES: Fastening to chassis, installing components and securing top with body clip.

COMMENTS: For the 3.3 version only.

Quantity   
TRA5160.jpg
Traxxas Aluminum Engine Mount T-Maxx 3.3
$11.00
TRA5160

This is the Aluminum Engine Mount for the Traxxas 3.3 T-Maxx.

FEATURES: Replaces damaged engine mounts

INCLUDES: Engine mount, eight 3x10mm socket head screws, eight flat washers and eight lock washers.

REQUIRES: 2mm hex wrench, GPMR8011

SPECS: Length: 2.3" (57.5mm)
Width: 1.1" (28.5mm) at widest point
Height: 0.79" (20mm)

Quantity   
TRA5161.jpg
Traxxas Suspension Screw Pin Set (8)
$9.00
TRA5161

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FEATURES: Steel construction
Silver in color

INCLUDES: Two 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES: T-Maxx 3.3

Quantity   
TRA5168.jpg
Traxxas Slide Carb Linkage Set T-Maxx 2.5
$6.00
TRA5168

This is the Replacement Slide Carb Linkage set for the T-Maxx 2.5. These parts connect the throttle servo to the engine carb. This linkage set will not work with the older T-Maxx with the Pro .15 engine. For that set use, TRA4069.

FEATURES: Includes all parts in linkage set.

INCLUDES: One long linkage wire (160mm)
One medium linkage wire (100mm)
One short linkage wire (35mm)
Four 2mm rod collars
Two threaded rod connectors (threads onto servo arm)
Four 3mm set screws
Two 3mm nylon lock nuts
One washer
One spring
One ball link connector
One piece of silicone tubing

REQUIRES: Installation onto vehicle.

Quantity   
TRA5169.jpg
Traxxas Screws Countersunk Machn 2.6x8mm T-Maxx 2.5 (6)
$2.00
TRA5169

This is a package of flat head Countersunk Machine Screws from Traxxas.

FEATURES: Silver metal construction
Flat head
Phillips drive

INCLUDES: (6) 2.6 x 8mm Round Head Machine Screws

SPECS: Length: 8mm
Diameter: 2.6mm

COMMENTS: These are meant for Traxxas' EZ Start 2 motor, but will fit other applications also.

Quantity   
TRA5170.jpg
Traxxas Recoil Starter TRX 2.5
$20.00
TRA5170

This is the Recoil Starter for the 2.5 and 3.3 Traxxas engines.

FEATURES: Black plastic case

INCLUDES: One Recoil Starter
Four 3mm x 12mm cap head screws

REQUIRES: 2mm Allen Wrench

SPECS: Mounting Holes center-to-center: 27mm

COMMENTS: This part is for the recoil unit only Screws have thread-locking compound pre-applied

Quantity   
TRA5181.jpg
Traxxas Gearbox Halves Front/Rear
$10.00
TRA5181

These are the Gearbox Halves for the T-Maxx 3.3.

FEATURES: Holds all gears including the 2speed gear set and input shaft
Gray in color, constructed of hardened plastic
Fits front or rear of vehicle

INCLUDES: One each Front and Rear Gearbox Halves, Rubber Access Plug, seven 3x13mm socket head screws

REQUIRES: Fastening to chassis

COMMENTS: For the 3.3 version only.

Quantity   
TRA5211R.jpg
Traxxas Roller Clutch T-Maxx 2.5
$22.50
TRA5211R

This is the Replacement Roller Clutch for the T-Maxx 2.5. This is located at the EZ Start end of the crankshaft. This is the One Way bearing for the starter.

FEATURES: Steel construction

INCLUDES: One roller clutch

REQUIRES: Nothing. This is a direct replacement part.

SPECS: Length: 12mm (0.47")
Inner diameter: 6mm

Quantity   
TRA5214.jpg
Traxxas Clutch Bell 14T/Fiber Washer/E-Clip Revo (2)
$12.00
TRA5214

This is the Clutch Bell with Washer and E-Clip for the Revo.

FEATURES: Metal construction
Five cooling holes on the face of bell (bellow the teeth)

INCLUDES: One clutch bell Part #5214
Two washers Part #1985
Two e-clip Part #1633

REQUIRES: This clutch bell uses different bearings than the 15T or 16T bell, you will need 5X10mm ball bearings TRA9609.

SPECS: Diameter at the base: 15/16" (24mm)
Height: 11/16" (17mm)
Teeth: 14

Quantity   
TRA5227.jpg
Traxxas Cooling Head Protector TRX 2.5
$3.00
TRA5227

These are Replacement Cooling Head Protectors for the Traxxas 2.5 Engine. These attach to the top of the cooling head.

FEATURES: Black nylon construction

INCLUDES: Two cooling head protectors

REQUIRES: Installation onto engine.

COMMENTS: These are designed specifically for the 2.5 engine.

Quantity   
TRA5230X.jpg
Traxxas Piston/Sleeve TRX2.5R Revo
$70.00
TRA5230X

This is the Piston and Sleeve for the Traxxas 2.5 Revo Engine.

FEATURES: Piston/sleeve is ABC construction.
Four port design.

INCLUDES: One piston
One sleeve

REQUIRES: Installation into 2.5 Revo engine.

SPECS: Sleeve length: 27.6mm (1.08")
Piston diameter: 14.7mm (0.58")

COMMENTS: The sleeve has a notch for correct positioning.

Quantity   
TRA5234.jpg
Traxxas Carburetor Body/Plug/O-Ring TRX 2.5
$16.00
TRA5234

This is the Carburetor Body, Fuel Inlet Plug, and three O-Rings for the Traxxas 2.5 engine.

FEATURES: Carb body constructed of composite material, inlet plug is aluminum, and O-rings are rubber

INCLUDES: One Carburetor Body, Fuel Inlet Plug, and three O-Rings for the Traxxas 2.5 engine

REQUIRES: Installing all carburetor components into carb body
SPECS: Height: 1.4" (35.5mm) including outlet and intake horns Outlet Diameter: 0.53" (13.5mm) Intake Diameter: 0.51" (13mm) COMMENTS: This carb body is for the Traxxas 2.5 engine only
Quantity   
tra5241.jpg
Traxxas Idle Speed Screw TRX 2.5
$4.00
TRA5241

This is a replacement Idle Mixture Screw for the Traxxas TRX 2.5 Carb (TRA5252).

FEATURES: Pre-installed gasket

INCLUDES: One Needle

REQUIRES: Threading into carburetor

SPECS: Length: 13.8 mm (.54")
Diameter: 2.5 mm (.098")

Quantity   
tra5242.jpg
Traxxas Dust Boot Throttle/Return Spring TRX 2.5
$3.25
TRA5242 Quantity   
tra5552x.jpg
Traxxas Throttle Arm Set Screw TRX 2.5
$6.00
TRA5243

This is the Throttle Arm and Set Screw for the Traxxas 2.5 engine

FEATURES: Steel construction.
Black in color.

INCLUDES: One throttle arm.
One 3mm set screw.

SPECS: Length: 20mm (0.8")
Width: 9mm (0.35")

Quantity   
tra5244.jpg
Traxxas Flywheel Nut T-Maxx 2.5
$4.25
TRA5244

This is a Replacement Flywheel Nut from Traxxas.

FEATURES: Metal construction.
Used on the Traxxas TRX 2.5. engine

INCLUDES: (1) Flywheel Nut

Quantity   
tra5245.jpg
Traxxas Tuned Pipe Coupler/Exhaust Deflector Set Revo
$4.00
TRA5245

This is the Tune Pipe Coupler and Exhaust Deflector set for the Traxxas Revo. It allows for a connection between the Exhaust Header and the Tune Pipe.

FEATURES: Silicone construction
Blue in color

INCLUDES: One Tune Pipe Coupler
One Exhaust Deflector (for use on the tune pipe)
One short Tie-Strap
Two long Tie-Straps

REQUIRES: Assembly to vehicle

SPECS: Coupler Length: 24mm (.95")
Coupler Inner Diameter, Large: 14mm (.55")
Coupler Inner Diameter, Small: 13mm (.51")
Coupler Outer Diameter, Large: 25mm (.98")
Coupler Outer Diameter, Small: 22mm (.87")
Deflector Length: 61mm (2.4")
Deflector Inner Diameter, Small: 8mm (.32")
Deflector Inner Diameter, Large: 10mm (.40")
Deflector Outer Diameter, Small: 11mm (.44")
Deflector Outer Diameter, Large: 14mm (.55")

COMMENTS: If Tune Pipe is needed, use TRA5342.
If Header is needed, use TRA5340.

Quantity   
tra5246.jpg
Traxxas Tuned Pipe Coupler Blue
$1.75
TRA5246

This is the Blue Silicone Pipe Coupler for the T-Maxx 2.5 This goes between the tuned pipe and the header

FEATURES: Blue silicone construction
For use with pipes #5152 and #4452

INCLUDES: One pipe coupler

REQUIRES: Installing on the vehicle with wire ties (can use ASCC3720)

SPECS: Length: 21mm
Diameter: 11.5mm ID & 17.5mm OD (small end)
15.8mm ID & 21.5mm OD (large end)

Quantity   
tra5256.jpg
Traxxas O-Ring Header T-Maxx 2.5
$1.20
TRA5256

This is the Replacement O-ring header gasket for the Traxxas 2.5 Engine. This is located on the header of the engine.

FEATURES: Red silicone construction.

INCLUDES: One 12.2x1mm o-ring.

REQUIRES: Nothing. This is a direct replacement part.

Quantity   
tra5260.jpg
Traxxas Air Filter Housing T-Maxx/Stadium Maxx
$12.00
TRA5260

This is the Traxxas Air Filter Housing for the T-Maxx 2.5. This attaches to the throat of the carburetor.

FEATURES: Black plastic air filter housing with cover screen and and changeable element
Rubber angled neck for filter
Rubber adapter for filter
Zip tie for fastening

INCLUDES: One screened filter
One rubber straight neck
One rubber adapter
One zip tie

REQUIRES: TRX 2.5 engine or any carburetor that has a 14mm or 13mm outer carb throat opening

SPECS: Diameter: 1.5" (39mm)
Height: 2.4" (60mm) including rubber adapter
Diameter of carb adapter: 0.53" (13.5mm)
Length of zip tie: 4.7" (120mm)

Quantity   
tra5261.jpg
Traxxas Air Filter Foam Inserts Oiled (3)
$6.25
TRA5261

This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine.

FEATURES: Constructed of foam and pre-oiled to trap dirt

INCLUDES: Three Air FIlter Inserts for the Traxxas 2.5 engine

REQUIRES: Installing in air filter boot on engine

SPECS: Height: 0.87" (22mm)
Diameter: 0.98" (35mm)

Quantity   
tra5262.jpg
Traxxas Air Filter Pre-Filter Foam Inserts (3)
$10.00
TRA5262

This is a package of three Air Filter/Pre-Filter Foam Inserts for the Traxxas .20 cu in (3.3cc) racing engine.

FEATURES: Constructed of foam and pre-oiled to trap dirt
Pre-Filter for extra filtration

INCLUDES: Three Air FIlter Inserts for the Traxxas 3.3 engine

REQUIRES: Installing in air filter boot on engine
Order DTXC2465 if air filter oil is required

SPECS: Height: 38mm (1.5")
Diameter: 38mm (1.5")

Quantity   
tra5266.jpg
Traxxas High Volume Air Filter Body Revo 3.3
$14.00
TRA5266

This is the High Volume Air Filter Body for the Traxxas Revo 3.3.

FEATURES: Replaces damaged or dirty air filter assemblies
Plastic body with foam element and rubber attachment hose

INCLUDES: Foam filter and pre filter, support cap, filter base and wire mount

REQUIRES: Air filter oil, DTXC2465

SPECS: Total Height: 3.9" (100mm)
Filter Diameter: 1.6" (41mm)

Quantity   
tra5274.jpg
Traxxas Back Plate w/Starter TRX 2.5
$12.00
TRA5274

This is the Replacement Backplate for the Traxxas 2.5 engine. This backplate is used on the 2.5 equipped with EZ starter.

FEATURES: Aluminum construction.

INCLUDES: One backplate with pre-installed bushing.

REQUIRES: Installation onto 2.5 engine.

SPECS: Length: 32mm (1.26")
Width: 32mm (1.26")

Quantity   
tra5275.jpg
Traxxas Housing Inner/Outer T-Maxx 2.5
$7.50
TRA5275

This is the Replacement EZ Start 2 Housing that is used on the 2.5 T-Maxx. This is the black plastic EZ Start 2 case.

FEATURES: Black plastic construction

INCLUDES: One inner housing
One outer housing
Five 3x12mm round head machine screws
One brass sleeve
One 3x20mm rounf head machine screw

REQUIRES: The remainder of the EZ Start 2 system.

Quantity   
tra5276.jpg
Traxxas Gear Set Complete T-Maxx 2.5
$9.00
TRA5276

This is the Replacement Complete Gear Set for the EZ Start 2 System. The EZ Start 2 system is used on the Traxxas T-Maxx 2.5.

FEATURES: White plastic gears

INCLUDES: Eight different gears
One metal 4mm sleeve
One 5x12.5mm shaft

REQUIRES: The remainder of the EZ Start 2 system.

Quantity   
tra5279.jpg
Traxxas Motor/Pinion Gear/Motor Brush EZ Start 2
$15.00
TRA5279

This is the Motor and Pinion Gear for the Traxxas EZ Start 2 (R) System, TRA5271.

FEATURES: Pre-installed 10 tooth pinion gear

INCLUDES: Motor and Pinion Gear for the Traxxas EZ Start 2 (R) System

REQUIRES: Installing inside EZ Start 2 (R) case

SPECS: Length with shaft: 2.35" (59mm)
Can diameter: 1.09" (28mm)

Quantity   
tra5280.jpg
Traxxas Control Box Complete T-Maxx 2.5
$15.00
TRA5280

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3

FEATURES: Black plastic construction.
Green motor and glow plug led's.
Red start push button.

INCLUDES: Two easy start control box halves.

REQUIRES: 7.2V battery.
Onboard easy start 2 components.

SPECS: Length: 180mm (7.08")
Width: 50mm (1.96")

COMMENTS: This is for use with the Easy Start 2 (TRA5271)

Quantity   
tra5282.jpg
Traxxas Screws 3x12mm T-Maxx 2.5 (6)
$3.00
TRA5282

This is a set of six 3 x 12mm Screws for the Traxxas T-Maxx.

FEATURES: Button head machine screws.
Starter attachment screws with threadlock.

INCLUDES: Six screws.

SPECS: Length: 12mm
Diameter: 3mm

Quantity   
tra5287.jpg
Traxxas Aluminum Header Anodized Blue Nitro Rustler
$20.00
TRA5287

This is the Blue Anodized Header for Nitro Rustler and Nitro 4-Tec 2.5.

FEATURES: Blue anodized header
Cooling fins on mounting flange

INCLUDES: One header
Two allen mounting screws
One O-ring for sealing the header

SPECS: Length: 1.64" (41mm)
Width: 1.69" (43mm)
Height: 1.34" (34mm)
Diameter: .52" (13mm)

Quantity   
tra5321.jpg
Traxxas Steel Suspension Pin Set Revo
$4.75
TRA5321

This is the Steel Suspension Pin Set for the Traxxas Revo. They are also commonly known as Hinge Pins.

FEATURES: Steel construction
Polished finish

INCLUDES: Two Long Suspension Pins
Four Short Suspension Pins

REQUIRES: Assembly to vehicle If the Caster Spacers are need, use TRA5134

SPECS: Long Suspension Pin Length: 85mm (3.35")
Short Suspension Pin Length: 24mm (0.95")
Pin Diameter: 3.3mm (0.13")

Quantity   
TRA5324X.jpg
Traxxas Electronics Box 5308
$10.00
TRA5324X

This is the Electronics Box for the Traxxas Slayer Pro 4WD Short Course Nitro RTR These parts attach directly to the chassis.

FEATURES: Black plastic construction
Accomodates either AA battery holder or RX flat pack

INCLUDES: One receiver box with cover
One battery box with cover
Rubber charge jack plug
Foam pad and adhesives
Mounting hardware

REQUIRES: Installation on the vehicle

Quantity   
tra5329.jpg
Traxxas Rear Bulkhead Revo
$15.00
TRA5329

This is the Rear Bulkhead for the Traxxas Revo.

FEATURES: Black plastic construction
Rocker shafts preinstalled

INCLUDES: Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES: Installation on the Traxxas Revo

Quantity   
tra5331.jpg
Traxxas Right Fr Upper/Lower Suspension Arms Revo (2)
$7.50
TRA5331

This is the Upper & Lower RIGHT FRONT Suspension Arm Set for the REVO from Traxxas.

FEATURES: Durable black nylon construction

INCLUDES: One upper RIGHT FRONT suspension arm
One lower RIGHT FRONT suspension arm

REQUIRES: Suspension pin set TRA5321 to attach to bulkhead

SPECS:
UPPER LOWER
Length: 4.8" (122mm) 6.1" (154mm)
Width: 2.5" (63mm) 2.8" (72mm)

Quantity   
tra5332.jpg
Traxxas Left Fr Upper/Lower Suspension Arms Revo (2)
$7.50
TRA5332

This is the Upper & Lower LEFT FRONT Suspension Arm Set for the REVO from Traxxas.

FEATURES: Durable black nylon construction

INCLUDES: One upper LEFT FRONT suspension arm
One lower LEFT FRONT suspension arm

REQUIRES: Suspension pin set TRA5321 to attach to bulkhead

SPECS:
UPPER LOWER
Length: 4.8" (122mm) 6.1" (154mm)
Width: 2.5" (63mm)

Quantity   
tra5333.jpg
Traxxas Re Left or Right Upper/Lower Susp Arms Revo (2)
$7.50
TRA5333

This is a pair of stock replacement Rear Suspension Arms for the Traxxas Revo. These arms attach to the rear bulkhead.

FEATURES: Black nylon construction

INCLUDES: One upper rear suspension arm
One lower rear suspension arm

REQUIRES: Nothing. These are direct replacement parts.

COMMENTS: Since these are symmetrical, they can be used on left or right side.

Quantity   
tra5334.jpg
Traxxas Left & Right Axle Carriers Revo
$8.00
TRA5334

This is the set of Axle Carriers and Steering Blocks for the Traxxas Revo. The axle carriers and steering blocks support the stub axles and bolt to the upper and lower suspension arms at each wheel.

FEATURES: Replaces damaged axle carriers and steering blocks. Constructed of black plastic.

INCLUDES: One set of axle carriers and steering blocks for the Traxxas Revo.

REQUIRES: Bolting to each suspension arm, installing two 12x18mm ball bearings, stub axles, and pillow balls

Quantity   
tra5336.jpg
Traxxas Rear Bumper & Mount Revo
$7.50
TRA5336

This is a Rear Bumper and Mount for the Traxxas Revo.

FEATURES: The plastic bumper is silver in color "TRX" logo in the center of the bumper Body mount is black in color

INCLUDES: One rear bumper Part #5336
One bumper mount Part #5336
(2) 4X10mm button head screws
(2) 3X26mm button head screws

REQUIRES: Installation on the Traxxas Revo

Quantity   
tra5337.jpg
Traxxas Skid Plate Set Revo
$8.00
TRA5337

This is the Front and Rear Skid Plates for the Traxxas Revo.

FEATURES: Black plastic construction
Front skid plate is a two-piece design
Rear skid plate is a one-piece design

INCLUDES: Front and read skid plates Part #5337
(8) 3X10mm button head screws Part #2577
(1) 3X30mm button head screws Part #2582

REQUIRES: Installation on the Traxxas Revo

Quantity   
tra5338.jpg
Traxxas Toe Link 5.0mm Steel Revo (2)
$10.00
TRA5338

This is a pair of replacement Toe Links for the Traxxas Revo Truck. These adjust the position of the toe on the vehicle.

FEATURES: Steel turnbuckle design
5.0mm diameter

INCLUDES: Two front or rear toe links

REQUIRES: Nothing. These are direct replacement parts.

SPECS: Length: 5.1" (129mm)

Quantity   
TRA5338R.jpg
Traxxas Lightweight Aluminum Turnbuckle Red Revo (2)
$25.00
TRA5338R

These are the optional Tubes Lightweight Aluminum Turnbuckles for the Traxxas Revo.

FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket titanium
Unique hollow tube design using 7075-T6 aluminum anodized fire red in color

INCLUDES: Two Tubes Lightweight Aluminum Turnbuckles for the Traxxas Revo with non-marring 7mm aluminum wrench, 4 front and rear rod ends

REQUIRES: Installing on Revo

SPECS: Length: 5.04" (128mm)
Diameter: 0.24" (6mm)

Quantity   
tra5340.jpg
Traxxas Aluminum Exhaust Header Silver Revo
$20.00
TRA5340

This is the Aluminum Exhaust Header for the Traxxas Revo.

FEATURES: Aluminum construction
Silver in color
Fluted on tuned pipe end for better silicone coupler connection
Heatsink engine mounting flange

INCLUDES: One Exhaust Header

REQUIRES: Assembly to vehicle

SPECS: Length: 59mm (2.32")
Pipe diameters: Outside-13mm (.52") Inside -10mm (.40")
Width between engine exhaust mount holes: 22mm (.866")

COMMENTS: If needed, engine/header mounting screws, use TRA5142.

Quantity   
tra5341.jpg
Traxxas Linkage Steering Revo 3.3 (2)
$3.50
TRA5341

This is the Steering Linkage for the Traxxas Revo 3.3.

FEATURES: Connects between servo horns and steering arms

INCLUDES: Two 3x50mm steel turnbuckles, four short rod ends and four hollow balls

REQUIRES: Installing on steering assembly according to instructions in manual

Quantity   
tra5346.jpg
Traxxas Metal Tuned Pipe Hanger Revo
$2.00
TRA5346

This is a Metal Hanger for the Tuned Pipe on the Traxxas Revo.

FEATURES: Metal construction
Prebent hanger wire

INCLUDES: One metal hanger wire
One 4X10mm button head screw
One 4mm set screw

REQUIRES: Installion on the Revo

SPECS: Length: 7/8" (22mm)
Width at base: 3/8" (9mm)
Height: 3/4" (19mm)

Quantity   
tra5347.jpg
Traxxas Rod Ends w/Hollow Balls Large Revo (12)
$9.00
TRA5347

This is the Large Rod End Set for the Traxxas Revo.

FEATURES: Plastic construction
Black in color
Metal Pivot Balls

INCLUDES: 12 Rod Ends
12 Pivot Balls

REQUIRES: Assembly to vehicle

SPECS: Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Quantity   
tra5351.jpg
Traxxas Slipper Pressure Plate & Hub Alloy Revo
$8.00
TRA5351


FEATURES: Aluminum construction

INCLUDES: One slipper pressure plate
One slipper hub

REQUIRES: Installation onto vehicle.

Quantity   
tra5352r.jpg
Traxxas Heavy Duty Slipper Clutch Rebuild Kit Revo/Maxx
$9.50
TRA5352R

This is the Heavy Duty Slipper Clutch Rebuild Kit from Traxxas.

FEATURES: Components for both nitro and electric Revo and Maxx trucks

INCLUDES: Three Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two Locknuts, Spring, two Spring Washers and Instructions

REQUIRES: Disassembly of slipper clutch

Quantity   
tra5352x.jpg
Traxxas Slipper Clutch Rebuild Kit Revo/T-Maxx
$7.50
TRA5352X

This is a Slipper Clutch Rebuild Kit for the Traxxas Revo and T-Maxx.

FEATURES: Repairs damaged slipper clutches

INCLUDES: (1) Spring
(2) Nuts
(1) Pin
(1) Metal Plate
(3) Pads
(2) Washers

REQUIRES: Installation

Quantity   
Tra5354.jpg
Traxxas Steel Rocker Arm Post Revo (2)
$3.25
TRA5354

These are the Steel Rocker Arm Posts for the REVO from Traxxas.

FEATURES: Black steel construction

INCLUDES: Two Rocker Arm Posts

REQUIRES: Installing on the vehicle

SPECS: Length: 1.3" (32.8mm)
Diameter: 0.20" (5mm) unthreaded portion
0.23" (5.9mm) threaded portion
Quantity   
tra5355X.jpg
Traxxas Aluminum Hollow Ball Set Revo
$29.50
TRA5355X

This is the Aluminum Hollow Ball Set for the Traxxas Revo.

FEATURES: Aluminum Construction
Gun Metal Grey in Color

INCLUDES: Thirty Tall Centered Aluminum Hollow Balls
Two Tall Offset Aluminum Hollow Balls
Two Bump/Steer Adjustment Shims

REQUIRES: Assembly onto Vehicle.

Quantity   
tra5359.jpg
Traxxas Rocker Arm Set Progressive-3 Revo
$8.00
TRA5359

This is the Rocker Arm Set Progrssive 3 (90-T) for the REVO from Traxxas.

FEATURES: Durable gray nylon construction

INCLUDES: An eight piece Rocker Arm Set

REQUIRES: TRA5319 Pushrod

Quantity   
tra5363.jpg
Traxxas Complete Fuel Tank Revo
$16.00
TRA5363

This is a Complete Fuel Tank for the Traxxas Revo. Holds and distributes the Fuel to the Carb

FEATURES: Plastic Construction
Tight Spring on the top to prevent air leakage
Puller for opening the fuel tank quickly

INCLUDES: (1) Fuel Tank

REQUIRES: Installation
SPECS: Length: 3-5/8" (92mm) Width: 2-1/4" (57mm) Height: 3" (76mm)
Quantity   
tra5365.jpg
Traxxas Brake Pad Set Revo
$7.50
TRA5365

This is the replacement Brake Pad Set for the Traxxas Revo. These pinch the brake disk to slow the vehicle.

FEATURES: Aluminum construction with fiber pads pre-glued

INCLUDES: Two brake pads

REQUIRES: Nothing. These are direct replacement parts.

Quantity   
tra5368.jpg
Traxxas Linkage Set Revo
$8.00
TRA5368

This is the Throttle & Brake Linkage Set for the REVO from Traxxas.

INCLUDES: Throttle & brake linkage linkage rods, springs, thumb nut, & various other hardware

REQUIRES: Installing on the vehicle

Quantity   
tra5380.jpg
Traxxas Front & Rear Differential Housing Revo
$4.00
TRA5380

This is the Front and Rear Differential Housing for the REVO from Traxxas.

FEATURES: Durable black nylon construction

INCLUDES: One diff housing (2 pieces)

REQUIRES: TRA5119 10x15mm Bearing (1)
TRA5118 8x16mm Bearing (1)
TRA5117 6x12mm Bearings (2)
TRA5381 Diff Carrier & Gasket
TRA3965 Cap Head Screw 2.5X8MM
TRA2587 Cap Head Screw 3X10MM
TRA5329 Rear bulkhead
TRA5330 Font bulkhead

Quantity   
tra5381.jpg
Traxxas Diff Carrier/X-Ring & Ring Gear Gaskets Revo
$4.25
TRA5381

This is the Diff Carrier/Gasket Set for the Traxxas Revo.

FEATURES: Plastic Diff Carrier
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

INCLUDES: One Diff Carrier
Two Blue Rubber Shaft Gaskets
One Black Rubber Diff Carrier Gaskets
One Gray Washer
REQUIRES: Assembly to vehicle
Quantity   
tra5382x.jpg
Traxxas Gear Set Diff E-Maxx
$14.00
TRA5382X

This is the Differential Gear Set for the Traxxas Revo and E-Maxx.

FEATURES: Steel construction

INCLUDES: Two Output Gears
Two Spider Gears
Spider Gear Shaft and Diff Carrier Support
Instruction Sheet

REQUIRES: Diff lube;
10K weight TRA5135
50K weight TRA5137
30K weight TRAC5136
Multi-weight set TRA9136

Quantity   
tra5383.jpg
Traxxas Gear Set 2-Speed Close Ratio Revo
$7.50
TRA5383

This is a Two-Speed Close Ratio Gear Set for the Traxxas Revo transmission. These parts are located in the center transmission.

FEATURES: White plastic construction

INCLUDES: One 40T 2nd speed gear
One 13T/16T input gear
One screw pin

REQUIRES: Installation into Traxxas Revo.

Quantity   
tra5385.jpg
Traxxas Gear Set 2-Speed Std Ratio Revo
$7.50
TRA5385

This is a Two-Speed Standard Ratio Gear Set for the Traxxas Revo transmission. These parts are located in the center transmission.

FEATURES: White plastic construction

INCLUDES: One 39T 2nd speed gear
One 13T/17T input gear
One screw pin

REQUIRES: Installation into Traxxas Revo.

Quantity   
tra5395.jpg
Traxxas Forward/Reverse Output Gears Revo
$9.00
TRA5395

These are the replacement FWD/REV Output Gears for the Traxxas Nitro Revo Monster Truck.

FEATURES:
Nylon Construction
Black and White in Color

INCLUDES:
One Nylon FWD Output Gear
One Nylon REV Output Gear
One White Nylon Drive Dog Carrier
REQUIRES: Assembly onto Vehicle

SPECS: FWD Gear-
Diameter: 30mm (0.94")
Thickness: 5.8mm (0.23")
Teeth: 28T
REV Gear-
Diameter: 30mm (0.94")
Thickness: 9.5mm (0.37")
Teeth: 28T

Quantity   
tra5396x.jpg
Traxxas Primary Gears Forward/Reverse
$7.00
TRA5396X

These are the Primary Forward and Reverse Gears for the Traxxas T-Maxx 3.3.

FEATURES: Steel and plastic gears

INCLUDES: One Plastic Forward gear
One Steel Reverse gear
One Steel retaining clip
One copper gear washer
One gear pin
One instruction sheet

Quantity   
tra5397.jpg
Traxxas OptiDrive Sensor Assembly Revo
$8.00
TRA5397

This is a replacement Optidrive Sensor Assembly for the Traxxas Revo. This part senses the motion of the transmission for forward/reverse shifting.

FEATURES: Preassembled sensor assembly

INCLUDES: One Optidrive Sensor
Two 2.5x6mm caphead machine screws

REQUIRES: Nothing. This is a direct replacement part.

Quantity   
tra5411.jpg
Traxxas Wing Mount Revo 3.3
$10.00
TRA5411

This is the Wing Mount for the Traxxas Revo 3.3

FEATURES: Nylon Construction
Black in Color

INCLUDES: Two Wing Supports
One Wing Mount
Four 4mm x 8mm Cap Head Socket Screws
Four 3mm x 12mm Cap Head Socket Screws
One Instruction Sheet

REQUIRES: Installation

Quantity   
tra5451x.jpg
Traxxas Drive Shaft Assembly
$12.00
TRA5451X

This is the Driveshaft Assembly for the Traxxas Revo 3.3. and the T-Maxx 3.3.

FEATURES: Fully assembled
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping sections from dirt
Attaches to the differential with one screw pin
Works on the front or rear, right or left of vehicle

INCLUDES: #5458X Yoke, TRA9798
#5145 Screw Pin, TRA5145
#5450 Halfshaft, TRA7450
#5452 U Joint, TRA7452
#5459 Rubber Boot, TRA7459
Instruction sheet

REQUIRES: Installing on chassis

Quantity   
tra5453.jpg
Traxxas Yokes Stub Axle w/Pins Revo (2)
$4.00
TRA5453

This is a pair of replacement Drive Yokes for the Traxxas Revo. These yokes attach to the half shaft assemblies.

FEATURES: Black plastic construction

INCLUDES: Two yokes
Two drive pins

REQUIRES: Nothing. These are direct replacement parts.

Quantity   
tra5456.jpg
Traxxas Half Shafts Center (2)
$4.25
TRA5456

These are the Center Half Shafts for the Traxxas Revo 3.3.

FEATURES: Constructed of hardened plastic
For front and rear driveshafts

INCLUDES: Two external splined shafts
Two internal splined shafts

REQUIRES: Installing between yokes on each drive shaft assembly

SPECS: Length: 1.9" (48.2mm)

Quantity   
tra5459.jpg
Traxxas Boots Drive Shaft Rubber Revo (2)
$2.50
TRA5459

These are the replacement Drive Shaft Boots for the Traxxas Nitro Revo Monster Truck.

FEATURES: Rubber Construction
Blue in Color

INCLUDES: Two Blue Rubber Driveshaft Boots

REQUIRES: Assembly onto Vehicle

Quantity   
tra5462.jpg
Traxxas GTR Shock Rebuild Kit Revo (2)
$5.00
TRA5462

This is the GTR Shock Rebuild Kit by Traxxas.

FEATURES: Shock rebuild parts

INCLUDES: Four blue plastic shock pistons
Two blue rubber diaphragms
Four black plastic shock ends
Two piston lock nuts
Four metal X-rings

COMMENTS: This set will rebuild two shocks

Quantity   
tra5478.jpg
Traxxas Flat Wrench 8mm Blue Revo
$4.00
TRA5478

This is a Flat, Open-End 8mm Wrench for the Traxxas Revo.

FEATURES: Aluminum Construction
Blue anodization
Etched "Traxxas" and "8mm" logos
Drilled hole on one end of easy hanging

INCLUDES: One Wrench

REQUIRES: None

SPECS: Length: 76mm (3.00")
Thickness: 3.5mm (.136")
Wrench Size: 8mm (.315")

COMMENTS: Can be use in most places where an 8mm wrench is required.

Quantity   
tra5480.jpg
Traxxas 17mm Splined Wheel Wrench
$3.00
TRA5480

This is the 17mm Splined Wheel Wrench from Traxxas.

FEATURES: Nylon construction
Black in color

INCLUDES: One 17mm splined wheel wrench

COMMENTS: Works with the Traxxas New 3.3 4WD Nitro Monster Truck RTR (TRA61**

Quantity   
tra5517.jpg
Traxxas Rear Shock Tower Jato
$5.00
TRA5517

This is the Rear Shock Tower for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Nylon construction
Black in Color

INCLUDES: One Rear Shock Tower

REQUIRES: Assembly onto Vehicl.

Quantity   
tra5519.jpg
Traxxas Left & Right Steering Servo Mounts Jato
$2.25
TRA5519

These are the Left and Right Steering Servo Mounts for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Nylon construction
Black in color

INCLUDES: One Left Steering Servo Mount
One Right Steering Servo Mount

REQUIRES: Assembly onto Vehicle

Quantity   
tra5521.jpg
Traxxas Front & Rear Suspension Pin Set Jato (10)
$8.00
TRA5521

This is the Front and Rear Suspension Pin Set for the Traxxas Jato.

FEATURES: Constructed of steel, 1/16" (3mm) in diameter
Holds suspension arms in place

INCLUDES: Four 1.1" (27mm) pins
Four 2.04" (52mm) pins
Two 1.4" (35mm) pins

REQUIRES: Inserting through suspension arms, mounts and stub axles

Quantity   
tra5523.jpg
Traxxas Chassis Top Plate Jato
$10.00
TRA5523

This is the Chassis Top Plate for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Nylon construction, holds receiver and throttle servo
Black in color

INCLUDES: One Chassis Top Plate.

REQUIRES: Assembly onto Vehicle

Quantity   
tra5526.jpg
Traxxas Antenna Crimp Nut & Antenna Nut Tool Jato
$4.00
TRA5526

This is the Traxxas Antenna Crimp Nut.

FEATURES: Anodized Blue Aluminum crimp nut

INCLUDES: One crimping nut
Nylon wrench

Quantity   
tra5530.jpg
Traxxas Front Upper & Lower Bulkheads Jato
$10.00
TRA5530

These are the Front Upper and Lower Bulkheads for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Nylon Construction
Black in Color

INCLUDES: One Front Upper Bulkhead
One Front Lower Bulkhead

REQUIRES: Assembly onto vehicle

Quantity   
tra5532.jpg
Traxxas Left/Right Caster & Steering Blocks 30 Deg Jato
$6.00
TRA5532

These are the Left and Right Caster and Steering Blocks for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Nylon construction
Black in color

INCLUDES: One Left and Right 30 Caster Blocks
One Left and Right 30 Steering Blocks

REQUIRES: Assembly onto Vehicle

Quantity   
tra5537.jpg
Traxxas Front Left & Right Wheel Spindles Jato (2)
$8.00
TRA5537

These are the Front Left and Right Wheel Spindles for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Metal construction
Black in color

INCLUDES: One Left Front Wheel Spindle
One Right Front Wheel Spindle

REQUIRES: Assembly onto Vehicle

Quantity   
tra5539.jpg
Traxxas Turnbuckle Camber Links 58mm Jato (2)
$7.50
TRA5539

These are the 58mm Turnbuckle Camber Links for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends
Can be Used on Front or Rear

INCLUDES: Two 58mm Threaded Rods
Four 3mm Ball Ends
Four 3mm Hollow Balls

REQUIRES: Assembly onto Vehicle

Quantity   
tra5542.jpg
Traxxas Steering Drag Link w/Shoulder Screws Jato
$3.50
TRA5542

This is the Steering Drag Link w/Screw for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Nylon construction
Black in color

INCLUDES: One Nylon Steering Drag Link
Two 3mm Shoulder Screws

REQUIRES: Assembly onto Vehicle

Quantity   
tra5552x.jpg
Traxxas Slipper Clutch Rebuild Kit Slash 4X4
$10.00
TRA5552x

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles.

FEATURES: Steel construction

INCLUDES: One Steel Disc
Three Friction Pads
Two Springs
One 4mm Lock Nut
One 5mm Lock Nut
Instructions

REQUIRES: Disassembly of slipper clutch

Quantity   
tra5556.jpg
Traxxas Slipper Pressure Plate & Hub Jato
$8.00
TRA5556

These are the Slipper Press Plate and Hub for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Pot Metal Construction
Silver in Color

INCLUDES: One Slipper Press Plate
One Slipper Press Plate Hub

REQUIRES: Assembly onto Vehicle

Quantity   
tra5559.jpg
Traxxas Rear Suspension Pin Mounts Jato (4)
$3.50
TRA5559

These are the Rear Suspension Pin Mounts for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Nylon construction
Black in color

INCLUDES: One 1.5 Anti-Squat Suspension Pin Mount
One 2.25 Anti-Squat Suspension Pin Mount
One 3.0 Anti-Squat Suspension Pin Mount
One 3.75 Anti-Squat Suspension Pin Mount

REQUIRES: Assembly onto Vehicle

Quantity   
tra5561.jpg
Traxxas GTR Shocks Assembled w/o Spring Jato (2)
$22.00
TRA5561

This is a pair of GTR Composite Shocks without Springs for the Traxxas Jato.

FEATURES: Factory assembled for front installation on the Jato (1.4mm piston), for rear use, the installed pistons must be replaced with included 1.3mm rear pistons

INCLUDES: Two GTR Composite Shocks, bottle of silicone shock oil, two 1.3mm pistons and instruction sheet

REQUIRES: Springs (TRA7427 TRA7434) depending on desired stiffness

SPECS: Length: 3" (76mm)
Diameter: 0.61" (15.5mm) main body

Quantity   
tra5564.jpg
Traxxas Brake Disc Jato
$4.00
TRA5564

This is the Brake Disc for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Composite construction
Grey in color

INCLUDES: One Composite Brake Disc

REQUIRES: Assembly onto Vehicle

Quantity   
tra5579.jpg
Traxxas Diff Gear/Side Cvr/Gasket/Output Gear Seal Jato
$10.00
TRA5579

This is the Differential Gear for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Nylon construction
Black in color

INCLUDES: One Differential Gear 38T
One Differential Side Cover
One Differential Gasket
Two Output Gear Seals
Four 2.5mm x 8mm Countersunk Socket Head Screws
Two 5mm x 10.5mm Flat Washers
One Differential Drive Gear 20T

REQUIRES: Assembly onto Vehicle

Quantity   
tra5650.jpg
Traxxas Half Shafts E-Revo
$6.00
TRA5650

This is the Center Half Shaft Set for the Traxxas E-Revo

FEATURES: Plastic construction, black in color

INCLUDES: Center half shafts (three internal splined and two external splined)

REQUIRES: Installation on the vehicle

SPECS: Diameter: 17.2mm (0.68")

Quantity   
tra5655.jpg
Traxxas Half Shaft Set Short
$8.00
TRA5655

These are the Short Half Shafts for use on the Traxxas Summit Truck RTR

FEATURES: Plastic construction
Black in color

INCLUDES: Two Short Half Shaft Sets, internal splined half shafts and external half shafts with glued boot

REQUIRES: Installation on the vehicle

SPECS: Length: 117mm (4.6")
Diameter: 17.15mm (0.68")

Quantity   
tra5656.jpg
Traxxas Half Shaft Set Long
$8.00
TRA5656

These are the Long Half Shafts for use on the Traxxas Summit Truck RTR

FEATURES: Plastic construction
Black in color

INCLUDES: Two Long Half Shaft Sets, internal splined half shafts and external half shafts with glued boot

REQUIRES: Installation on the vehicle

SPECS: Length: 130mm (5")
Diameter: 17.3mm (0.68")

Quantity   
tra5661.jpg
Traxxas Motor Mount Hinge Post E-Revo
$2.50
TRA5661

This is the Motor Mount Hinge Post for the Traxxas E-Revo.

FEATURES: Nylon construction
Black in color

INCLUDES: One Motor Mount Hinge Post
One 4x10mm socket cap screw with split and flat washer
One 4x12mm socket head screw

REQUIRES: Installation on the motor mount and vehicle

SPECS: Length: 22.45mm (0.88")
Diameter: 10mm (0.39")

Quantity   
tra5678.jpg
Traxxas Gear Locking Differentail Output Summit
$12.00
TRA5678

This is the Locking Differential Ouput Gear for use on the Traxxas Summit Truck RTR

FEATURES: Steel construction

INCLUDES: One Locking Differential Output Gear
One Differential Slider
One 3x12mm Screwpin

REQUIRES: Installation on the vehicle

Quantity   
tra5687.jpg
Traxxas LED Lights Center Harness Summit
$6.00
TRA5687

This is the Center Harness and Wire Clip for the LED Lights used on the Traxxas Summit Truck RTR

FEATURES: JST Connectors

INCLUDES: One Center Harness
One Wire Clip
Three Zip Ties

REQUIRES: Installation on vehicle

Quantity   
tra5827x.jpg
Traxxas Battery Expansion Kit Slash Series
$6.00
TRA5827X

This is the Hold Down Battery Set for the Traxxas Slash, TRA43**.

FEATURES: Black nylon construction

INCLUDES: One Battery Hold Down
One Retainer Hold Down
One Battery Post
One Foam Spacer
One Angled Body Clip

REQUIRES: Installation on the chassis

Quantity   
tra5837.jpg
Traxxas Skid Plates Front & Rear Slash
$8.00
TRA5837

This is the Front and Rear Skidplate for the Traxxas Slash (TRAC43**). This skidplate bolts to the Chassis and the Bulkheads TRA5530 and provides protection to the front differential.

FEATURES: Skidplate is constructed of high impact molded black plastic
Front of skidplate kicks up at about 40 degrees to shield the differential from crash damage or hard landings from jumps

INCLUDES: One front skidplate
One rear skidplate

REQUIRES: Installing on chassis

Quantity   
TRA5914.jpg
Traxxas Center Differential Kit Slayer
$39.00
TRA5914

This is the Center Differential Kit for use on the Traxxas Slayer

FEATURES: Direct drop-in for the Slayer
Transfers power to the front and rear differentials independently
Sealed center differential is adjustable using various oil viscosities
Fully assembled with 100K oil

INCLUDES: Center Differential Kit for the Traxxas Slayer

REQUIRES: Installation

Quantity   
tra5931.jpg
Traxxas Fr Rt Upper & Lower Suspension Arms Slayer
$7.50
TRA5931

This is the Upper & Lower Right Front Suspension Arm Set for the Traxxas Slayer Pro 4WD Short Course Nitro RTR

FEATURES: Durable black nylon construction

INCLUDES: One Upper Right Front Suspension Arm
One Lower Right Front Suspension Arm

REQUIRES: Installation on the vehicle

Quantity   
tra5933x.jpg
Traxxas Suspension Arm Upper/Lower Right Rear
$7.50
TRA5933X

This is a Traxxas Right Rear Suspension Arm Set for the Traxxas Slayer Pro 4x4.

FEATURES: Black plastic construction

INCLUDES: Two arms

REQUIRES: Installation following the instruction manual

Quantity   
tra5996.jpg
Traxxas Primary Gear Set Slayer
$8.00
TRA5996

This is the Primary Gear Set for the Traxxas Slayer Pro 4WD Short Course Nitro RTR

FEATURES: Nylon construction
White in color

INCLUDES: Forward and Reverse Primary Gears
One Screw Pin
One Pin and Clip

REQUIRES: Installation on the vehicle

Quantity   
tra5998.jpg
Traxxas Sway Bar Kit Slayer
$30.00
TRA5998

This is the Sway Bar Kit for the Traxxas Slayer Pro 4WD Short Course Nitro RTR

FEATURES: Front and Rear Sway Bar Kit with Adjustable Linkages

INCLUDES: One Front and Rear Sway Bar
Two 3x23mm Button-Head Screws
Four 3x4mm Set screws
Two 6x10mm Washers
One Drill Guide
One 2.5mm Drill Bit
Installation instructions

REQUIRES: 1.5mm hex wrench
2mm hex wrench
2.5mm hex wrench
8mm nut driver
Safety glasses
Power drill and rotary tool

Quantity   
tra6523.jpg
Traxxas Sensor Temperature/Voltage Short
$12.00
TRA6523

This is the Short Temperature and Voltage Sensor from Traxxas.

FEATURES: Functions with the Traxxas Link system to display battery voltage and temperature

INCLUDES: Short Temperature and Voltage Sensor

SPECS: Length: 9.5" (241mm)

Quantity   
tra6540.jpg
Traxxas Telemetry Trigger Magnet 5x2mm XO-1
$2.00
TRA6540

This is the Telemetry Trigger Magnet for the Traxxas TQi Telemetry System.

FEATURES: 5x2mm round magnet

INCLUDES: Telemetry Trigger Magnet for the Traxxas TQi Telemetry System

Quantity   
tra6715.jpg
Traxxas Body Mount/Post Front Stampede 4X4
$4.00
TRA6715

This is the Front Body Mount/Post for the Traxxas Stampede 4x4 VXL, TRA29**.

FEATURES: Composite construction

INCLUDES: Front Body Mount and two Posts

REQUIRES: Installing on vehicle and attaching body

Quantity   
tra6732.jpg
Traxxas Front Suspension Arms/Guards Stampede 4X4
$7.00
TRA6732

<BR> These are the Front Suspension Arm Guards for the Traxxas Stampede 4x4 VXL. </BR>
 

<BR>FEATURES: Composite plastic construction Black in color </BR>

<BR>INCLUDES: Two front suspension arm guards          

<BR>Two guard spacers

<BR> Two hollow balls Eight 3x16mm button head cap screws </BR>

<BR>REQUIRES: Installation onto front susp</BR>


Quantity   
tra6735.jpg
Traxxas Front Bumper/Skid Plate Black Stampede 4X4
$7.50
TRA6735

This is the Front Bumper and Skidplate for the Traxxas Stampede 4x4 VXL.

FEATURES: Composite construction
Helps to protect front of chassis from damage

INCLUDES: Front Bumper and Skidplate

REQUIRES: Fastening to front of chassis

Quantity   
tra6828x.jpg
Traxxas Heavy Duty Diff Output Yokes Stampede 4X4 (2)
$4.00
TRA6828X

These are the Heavy Dyty Differential Output Yokes for the Slash 4x4 from Traxxas

FEATURES: Black plastic construction

INCLUDES: 2 Ouput yokes
2 screw pins

REQUIRES: Installation on vehicle

Quantity   
TRA6832.jpg
Traxxas Caster Blocks Left & Right Slash 4x4
$5.00
TRA6832

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FEATURES: Hardened plastic construction
Black in color

INCLUDES: One left caster block
One right caster block

REQUIRES: Installation on Slash

SPECS: Length: 49mm (1.93")
Width: 29.5mm (1.16")

Quantity   
tra6834.jpg
Traxxas Suspension Pin Set Slash 4x4
$4.00
TRA6834

This is the Suspension Pin Set for the Traxxas Slash 4X4. The hinge pins hold the suspension arms to the bulkheads

FEATURES: Durable steel construction
Silver in color

INCLUDES: Four 51.5mm pins
Four 30mm pins

REQUIRES: Installation on the Slash 4x4

Quantity   
tra6837.jpg
Traxxas Steering Blocks Left & Right Slash 4x4
$5.00
TRA6837

These are the Steering Blocks for the Traxxas Slash 4x4.

FEATURES: Hardened plastic construction
Black in color

INCLUDES: Two steering blocks

REQUIRES: Installation on steering assembly

SPECS: Length: 35mm (1.38")
Width: 32mm (1.26")

Quantity   
tra6845.jpg
Traxxas Steering Bellcranks Slash 4X4
$12.00
TRA6845

This is the replacement Steering Bellcrank Set for the Traxxas Slash 4X4.

FEATURES: Composite nylon construction, black in color
Replaces a worn or damaged bellcrank set

INCLUDES: One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring Retainer
Two Servo Arms
Two Shoulder Screws
Two 3x15 Counter Sunk Machine Screws
Two Hallow Balls

REQUIRES: Assembly and installation following the model manual and included instruction sheet

Quantity   
tra6853x.jpg
Traxxas Heavy Duty Rear Stub Axles Stampede 4X4
$6.00
TRA6853X

These are the Rear Heavy Duty Stub Axles for the Slash 4x4 from Traxxas

FEATURES: Aluminum construction

INCLUDES: 2 rear stub axles
2 pins

REQUIRES: Installation on vehicle

Quantity   
tra6854x.jpg
Traxxas Heavy Duty Front Stub Axles Stampede 4X4
$8.00
TRA6854X

This is the Front Heavy Duty Stub Axles for the Stampede 4x4 from Traxxas

FEATURES: Plastic and steel construction

INCLUDES: 2 Stub axles

REQUIRES: Installation on vehicle

Quantity   
tra6858.jpg
Traxxas Rear Springs White Slash 4X4
$6.50
TRA6858

This is a pair of Rear Progressive Rate White Shock Springs for the Traxxas Slash 4x4 Vehicles.

FEATURES: White in color
Steel construction
Progressive rate

INCLUDES: Two White Progressive Rate Shock Springs

REQUIRES: Installation on the vehicle
SPECS: Length: 65mm (2.6") Outer Diameter: 18.6mm (0.73") Inner Diameter: 15.7mm (0.62") Wire Diameter: 1.5mm (0.06")
Quantity   
tra6881.jpg
Traxxas Front Differential Housings Slash 4X4
$4.00
TRA6881

This is the Front Differential Housing for the Traxxas Slash 4x4.

FEATURES: Hardened plastic construction
Black in color

INCLUDES: Two front differential housing halves

REQUIRES: Installation around assembled differential components

Quantity   
tra6893x.jpg
Traxxas Aluminum Bearing Adapter Blue Slash 4X4
$5.00
TRA6893X

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES: 6061-T6 anodized blue aluminum construction
Steel 10x15x4mm ball bearing with blue rubber seal
Used on slipper shaft

INCLUDES: One aluminum adapter
One 10x15x4mm ball bearing

REQUIRES: Installation on to slipper shaft
Remaining clutch pieces

Quantity   
tra6898.jpg
Traxxas Sway Bar Kit Slash 4X4
$25.00
TRA6898

This is the optional Sway Bar Kit for the Traxxas Slash 4x4.

FEATURES: For front and rear application to reduce chassis roll in turns and add stability

INCLUDES: Two thick and two thin swaybars, two mounts, two linkage sets, mounting haardware and instructions

REQUIRES: Installing at front and rear of chassis

Quantity   
TRA7015.jpg
Traxxas Front & Rear Body Mounts & Posts 1/16 VXL
$6.00
TRA7015

These are the Front and Rear Body Mounts and Posts for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES: Nylon construction
Black in color

INCLUDES: One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

REQUIRES: Installation on the vehicle

Quantity   
TRA7018X.jpg
Traxxas Aluminum Pushrod Red 1/16 Slash VXL (4)
$23.00
TRA7018X

These are the optional Aluminum Pushrods for use on the Traxxas 1/16 scale Slash Vehicles.

FEATURES: Aluminum construction
Anodized red in color

INCLUDES: Four Pushrods
Eight Hollow Balls

REQUIRES: Installation on the vehicle

SPECS: Length: 55.25mm (2")
Diameter: 5mm (0.2")

Quantity   
tra7021.jpg
Traxxas Suspension Pin Set Front/Rear VXL
$4.75
TRA7021

This is the Suspension Pin Set for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES: Steel construction
Silver in color

INCLUDES: Two 2x46mm Pins
Four 2x14mm Pins

REQUIRES: Installation through suspension components

Quantity   
tra7026.jpg
Traxxas Battery Compartment Door E-Revo VXL
$5.00
TRA7026

This is the Battery Compartment Door and Vents for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES: Nylon construction
Black in color

INCLUDES: One Battery Compartment Door
Two Vents

REQUIRES: Installation on the vehicle

Quantity   
TRA7029X.jpg
Traxxas Bulkhead Rear Left & Right 3x10mm BCS (4)
$6.00
TRA7029X

This is the Rear Bulkhead for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES: Nylon construction, black in color

INCLUDES: Two Rear Bulkhead Sections
Four 3 x 10mm Button Head Screws
One 2.5 x 22mm Socket Head Cap Screw

REQUIRES: Installation on the vehicle

Quantity   
TRA7033.jpg
Traxxas Pivot Balls/Caps VXL (4)
$4.50
TRA7033

These are the Pivot Balls and Pivot Ball Caps for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES: Steel constructed pivot balls
Black nylon pivot ball caps

INCLUDES: Four Pivot Balls
Four Pivot Ball Caps

REQUIRES: Installation on the vehicle's suspension

Quantity   
TRA7034.jpg
Traxxas Axle Carriers Left & Right VXL
$6.00
TRA7034

These are the Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES: Nylon construction
Black in color

INCLUDES: One Left Axle Carrier
One Right Axle Carrier

REQUIRES: Installation on the vehicle

Quantity   
TRA7043.jpg
Traxxas Steering Arm E-Revo VXL
$12.00
TRA7043

This is the Steering Arm for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES: Nylon construction
Black in color

INCLUDES: Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
Two Ball Studs
Front and Rear Shock Mounts
Four 2.5x18mm Cap Head Screws

REQUIRES: Installation on the vehicle

Quantity   
TRA7047R.jpg
Traxxas Spur Gear 55T VXL
$3.00
TRA7047R

This is the optional 55T Spur Gear for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES: Nylon construction
Black in color

INCLUDES: One 55T Spur Gear

REQUIRES: Installation on the vehicle

SPECS: Outer Diameter: 30mm (1.2")
Inner Diameter: 5.5mm (0.22")
Width: 7.2mm (0.28")

Quantity   
TRA7051.jpg
Traxxas Driveshaft Assembly Slash VXL 3x10mm Pin
$8.00
TRA7051

This is the Driveshaft Assembly for use on the Traxxas 1/16 Slash VXL

FEATURES: Nylon construction
Black in color
Fits left or right

INCLUDES: One Fully Assembled Driveshaft Assembly

REQUIRES: Installation on the vehicle

Quantity   
TRA7057.jpg
Traxxas Yokes Differential & Transmission VXL
$3.00
TRA7057

These are the Differential and Transmission Yokes for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES: Nylon construction
Black in color

INCLUDES: Two Yokes
Two 3x10mm Screw Pins

REQUIRES: Installation on the vehicle

Quantity   
TRA7082.jpg
Traxxas Gear Set/Differential Output Shafts VXL
$10.00
TRA7082

This is the Differential Gear Set for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES: Steel construction

INCLUDES: Two Output Gears
Three Spider Gears
Two Differential Output Shafts
Three 1.5x6mm Pins
Two 1.5x8mm Pins

REQUIRES: Installation on the vehicle

Quantity   
TRA7131.jpg
Traxxas Suspension Arm Set Front VXL
$8.00
TRA7131

This is the Front Suspension Arm Set for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES: Nylon construction
Black in color

INCLUDES: One Upper Right Suspension Arm
One Lower Right Suspension Arm
One Upper Left Suspension Arm
One Upper Right Suspension Arm

REQUIRES: Installation on the vehicle

Quantity   
TRA7148.jpg
Traxxas GTR Shock Spring Black 1/16 Slash VXL (2)
$4.00
TRA7148

These are the optional Black Rate GTR Shock Springs for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES: Steel construction
Red in color
2.22 rate, black

INCLUDES: Two GTR Shock Springs

REQUIRES: Installation on the vehicle

SPECS: Length: 19.75mm (0.78")
Outer Diameter: 13.75mm (0.54")
Inner Diameter: 10.95mm (0.43")
Wire Diameter: 1.4mm (0.06")

Quantity   
tra7360.jpg
Traxxas Aluminum Finned Motor Mount
$10.00
TRA7360

This is the Finned Aluminum Motot Mount for the Traxxas 1/16 Ford Fiesta and Kyle Busch Camping World Race Replica RTR Vehicles.

FEATURES: Aluminum construction
Grey in color
Finned for cooling

INCLUDES: One finned motor mount

REQUIRES: Installation on to motor

Quantity   
tra7380.jpg
Traxxas Motor Plate For 550 Motor
$7.50
TRA7380

This is the Motor Plate for the 1/16 scale Fiesta from Traxxas.

FEATURES: Blue aluminum construction
Holds 550 size motor in place

INCLUDES: One motor plate

REQUIRES: Installation and attaching motor

Quantity